wiring

Hi I have a VE Ssv Ute 2012 and the p0118 code keeps coming up at random times, I have replaced the ECT sensor 3 times and also have replaced the plug for it as well and when I clear the codes it might be hours or a day or a week and then it pulls the code again so I checked the voltage at the...

I recently blew up the box in my 2008 sv6 I purchased another box from a wreckers and have noticed the plug on the back is a 20 pin and the plug on the old gearbox is a 19 pin the new box bolts up to the car fine with no issues. I was wondering if I could remove the wiring harness from the blown...

Where do these wires go in the video?? anyone know? There is a set of 6 wires coming out of the drivers side rear (rear) quarter behind the diff. They are connected to nothing and were just looped around and taped up. Do i need them for the trailer lights to work? I want to be able to tow...

hello everyone I’ve just done a vs Calais body loom conversion on my vs executive everything works except the horn can someone help please

Okay ill give a detailed explanation of what's been done and what i'm trying to do and what i need help with / Errors i have I have a VR Executive commodore, it was an auto but i have done a full manual conversion (Taken all the ecu and engine looms etc from my old write off factory manual)...

G,day just wondering if anyone would have the wiring instructions for a vn 304 into older models that used to be on calaisturbo.com. I can't seem to find it anymore

Hi there Just bought a boot lid for my VX commodore and the looms that are OEM to the car is a little different compared to the ones that came with the new boot lid, so as you might assume I'm a bit lost. Do I need to buy a seperate loom/adapter or modify it or something? Or do I need to...

Just put l67 with getrag into my vy and have no idea how to wire my manual loom into l67 style plugs to run l67 computer, please help, have extended wires to suit the l67 motor and have the loom on it

Hi all, just did a climate swap in my Vt to a vy dash a couple months back and when I hit the brake pedal the cluster and climate buttons turn in and when I take my foot of the brake pedal they turn back off Any ideas? please thanks I’m advance

Hi all, looking at making a stand alone loom, and just want to know what all these wires do individually. Anyone got a pinout or a diagram to suit this vy plug please Cheers

After researching for hours on end, I couldn’t find a single write-up on what to do about the whole “low beam turns off when high beam is on” issue when you go ahead and put projectors in an SV6 (VZ). So, here’s the entire procedure! What you’ll need - Wire crimper and stripper (this one works...

Hi Guys. Have a VT 304 Man. Having fuel mixture issues. Found PCM with some extra wires cut not connected to anything. Can anyone help? See image.

Hi, I need an engine wiring harness for a 2001 VU Ute (3.8 Ltr, auto)They seem hard to find. I have found a VX harness (same engine and gearbox) and I was wondering if I could use this instead. If so is there anything I need to be aware of or change?. I am assuming that it should be ok as the...

Wondering if anyone has a pin out diagram for the VF cluster. The family just closed up shop for good and I’ve got a bunch of parts laying around. I have two SS and two Berlina clusters but can’t find a wiring diagram to try find the kms stored on them. I couldn’t find anything on the forums...

Hi needing help. Have a vs 5l ute. It's a weekend car but after sitting for a week the battery is dead. It's got a brand new starter, brand new alternator, brand new battery, and yet still if I leave it for a week it won't start. When it's running it sits at a healthy 14 volts at the battery...

Hey guys, I'm just posting to try clarify some stuff. I have a WH gen 3 ls1 as a donor car. I want to put the ls1 in my vu ute. From reading here I know what parts need to be swapped but I was wondering with the whole ECU and BCM difference. Can I just swap it all, cluster, ecu, bcm, the wiring...

2 months ago I was having intermittent starting issue with my Vy where it would crank but no bang, turned out to be the CAS so I replaced it and all was good. Untill last week when it died while driving and now wont start at all ( crank but no bang again). My mechanic said it was throwing code...

Bought a late 2012 VE calais wagon tailgate garnish off ebay that came with a factory reversing camera. I’ve since cut the plug off to retro fit it to my wife’s MY9.5 base model SS wagon (i’ve upgraded the stereo to a version 9 ssv screen type stereo and had it vin matched, video in motion...

Hi everyone, I have recently started adding a few bits and bobs to my 2007 Vz crewman, while looking for stuff I happened upon my mates Vz Adventra that he was wrecking. I like the top console and the flip down cup holders from the Adventra model and was wondering if it’s possible to do a swap...

hey guys after some advice on my vn commodore have recently put a s2 buick into it and my loom was short circuiting i think so i wrapped it all individually in tape but now my earth is smoking would this happen if its not grounded well or something maybe a positive going to wrong place idk

Hello! So recently we have started changing the speakers out in my VE SV6 and we've had the issue that the rear speakers when balanced all the way to the rear can be barely heard on max volume. The speakers at the front are working perfectly but the rear speakers are very quiet. Is this an amp...

This is something i found to be invaluable when working on my vr and vs. Its a text version of snap on's diagnostic troubleshooter for vr vs commodores. It shows you how to correctly use a multimeter to test various circuits, relays and parts. Step by step guide for finding faults and problems...

Hi all just wanting some help in regards to fitting a 6 litre into my VZ V6 Sedan. Before I start getting just sell it and buy a v8 I completely agree with you that it’s heaps easier but due to sentimental family reasons results in why I want to do the conversion. I have a 6 litre engine out of...

I am wondering about the connection between the back of the head unit and the dash tweeter(And coincidently the door speaker on the same circuit) According to a wiring diagram, there is nothing more than a simple electrical connection happening there. I have provided a wiring diagram of what...

Hey guys, picked up a VE fixer upper for cheap. No windows work in it. No power to the two harnesses attaching to the door lock window module either. Right, so the last owner was running a cable from the 12v plug in the centre console through a switch direct to the window motor to put the...

Hi all, I recently purchased some LED headlights for my VY. They have arrived and I have tried fitting them and have run into some issues. 1. The H1 high beam LED has 2 connectors opposed to the halogen only having 1 connector. I believe I may have to buy a wiring converter (2 female to 1...

I just tapped a inline converter into the head unit but now the head unit and everything in that cluster stopped working but blows air from ac still, fuses seem ok but is there a fuse I'm unaware of?

hey guys, I’ve got a 2001 WH statesman l67 Okay so I’ve had my air con regassed professionally and pressure tested, there’s definitely no leaks and we’ve replaced the o rings with genuine ones, pressure checked it again 24 hours and still holds pressure But the air con clutch will not engage...

I currently have both the Holden and Ellerys Manuals however i am struggling to find info on the theft deterrent system to install my alarm, would someone with the Haynes manual be kind enough to share the VY theft deterrent wiring. Thanks

Hi All, Attempting to install an aftermarket alarm on my car and i have gone through the workshop manual however i still cannot find how to arm the factory alarm using the aftermarket unit, can some drop a wiring pinout or lead me to the correct wires for the factory arm & disarm? The door lock...

My previous VF Calais wagon was written off after hail storm damage so I removed the Kicker ZX200.2 amp and Alpine speakers before they carted it off. My replacement Calais V VF wagon has no room under the passenger seat for the amp due to the seat electrics. The only place where it would fit is...

Replaced the stock ones witha brand new one and it doesnt seem to turn on.. i tried everything in my knowledge to make it work.. it wouldnt be the head unit because its brand new. All the wirings are connected to where theyre suppose to be. Only thing i havent done is check the fuse.. but i want...

Went to get my ac regassed and got it given back because if wiring, i fixed the compressor wiring but now it still wont turn on, relay/fuse is ok, im aware that it may not turn on because it has no gas, but the little green wire connected to the compressor isn't getting power on the volt meter...

Hey Guys, I've almost completed converting the dash in my vx to a vy. I've run into a road block trying to find wiring diagrams for the electric windows online. I hear they're wired differently with the same plug. Currently it's plugged in and not working. Could someone please shed some light...

Hi all can anyone tell me is it possible to use a 2 wire crank angle sensor (say from a ford) on a v6 to control the dfi unit. ???? Instead of the 4wire Holden sensor

Hi lads, I have a VZ tonner and the fuel gauge just sits on empty, with the alarm and low fuel warning on every start up and constant flashing bowser on dash led screen, when I turn the ign off the needle drops to resting place below the E, but will not move past the E line when key on, no...

My stereo was fitted by a degenerate redneck, and i think there was a short somewhere so i pulled it apart. I need help figuring out what wires are what.

Had changed head unit from another aftermarket head unit to an alpine head unit. Unforunately everything was twist and taped instead of just using one of those conversions from supercheap so have had to manually wire everything to the new head unit. Previous to this the sensors worked and...

My front cigarette lighter is a pain in the ass. It keeps shorting out on something and blowing the fuse and you know, 10 amp fuses don't grow on trees... no, it's more that it's a pain in the c*nt to get to the back of to remount it properly. And when I do, it'll be fine at first, but the first...

Hey guys, I have a 09 hsv e2 senny sig 6.2l and was looking under the rear seat at the wiring and i've noticed on the left hand side (Battery side) the wiring loom is exposed and in one it is melted and burnt. Would anyone know what this loom is for/controlling? Ive had 2 fuel pump failures in...