tune

Hi all, I just trying to learn how to tune my 1994 VR Berlina 3.8l v6. I am going to be running a big crow cam, valve springs and all sorts. I was seeing if anyone knew how to tune the memcal or whatever. I know I need to get a Eprom Programmer and a 28 pin adaptor. Do I need a Eprom Eraser...

Hi guys first post, I have a VE Commodore Omega 2007 model i plan on getting it cammed buying all the parts myself and installing myself (as i’ve done with the rest of my mods) but for the tune i’ll need to get done professionally, Where are some good places in Sydney that are under a grand...

Hey, I have a 2011 sv6 ve series 2. I was wondering if anyone would know where I can get a cam package done in Sydney region. Everywhere I have enquired to has said they won’t do it for a 2011 lfx engine. So I thought I’d come on here and ask if anyone knew anything Thanks.

Hi, just looking for a good recommendation for a dyno tune for my car? Currently has a crackle tune from the previous owner, looking to get rid of that.

Hey guys, I have a sv6 z series commodore Ute with a growler cold air intake and I keep getting an engine code, I scanned it and it said bank 1 and 2 were running lean, so I need a tune for a cold air intake? And if so how much will it cost? Thanks

I got a vsiii motor in my vr with the VM prefix but no sign of it being a 195i, I have put in a non original chip in because of vats. Is it worth getting a 195i tune on a normal 5L? Is there meant to be any supporting mods or is it only a tune?

Hey guys I'm considering buying a alloytec equipped commodore but I was wondering what is the cheapest way to get roughly 220kw out of it. I can do most mods myself and can get my hands on most tools I would need for anything. Thanks.

What are typical power figures for stock and after a Tune/OTR? I had an OTR/Tune and it showed 270RWKW on the dyno (auto trans). What would that translate to at the flywheel? They didn't include before values so I don't have much idea what the gains were, but they seemed to suggest it tuned well.

Hi guys, Just wondering, for those located in Adelaide, who they might suggest for some mild “starter” modifications for my 2015 VF SS Commodore? Of course, I have done some reading, research, and quoted up prices on a few places. This includes Mopowa, Streetfighter, Independent Motoraports...

Is there anyone who can tune the ZB commodore in Perth ?

I’ve heard it’s best to buy from other aftermarket places than eBay they say a lot of companies there scam and What’s the best tuning chip to use and is turbo charging the car worth it? Seen a lot of videos in Aus where the hit above 800Hp also what exhaust is worth buying and That’s about it...

hey guys hope everyone's well, as for my inquiry, this ones slightly of a different nature. I'm currently in the process of reversing a standard l67 swap in a VX, Long story short iv'e bought a short l36 engine and used the trans and torque converter off the super 6, retaining the l36 flywheel...

Hi all, Just working on getting my VP SS roadworthy, but while having a bit of chubby inducing rev ups I've noticed there's a lot of unburnt fuel coming out the tail pipe and from the smell you can tell it's running rich. As far as I know the car is still stock asides from extractors, that...

my mate works at my local gateway Holden and has just started the first recall of the branch and because of the software updates involved said it could mess up my tune (mine is also on the vin list to go in and hes the one who will be doing the work) Im just curious if anyone has got more info...

Hi all I have a 1997 vs commodore Ute 5 speed getrag just the stock ecotec now I have a vs sedan Calais auto that has m90 supercharger ( L67 ) now the block is fucked and body is a wreak,I am planning on doing a top swap from vs Calais to my Ute,what way would u all go about this I will be doing...

Hi, I have a LFX sv6 auto thats already been MAF tuned with 185rwkw (everything stock) I've been wanting to make that bit more power and be a little louder so I looked into getting some high flow cats. Will they be worth it? and How will it affect the sound of my car on the stock system?

I have an l67, recently put on new heads and it's running well with a 3.4" pulley. I plan to put in high ratio rockers and a mini blizzard w2a. My question is do I need a dyno tune to drop to a 3 2" pulley or can i order a mace memcal or a memcal from a reputable l67 tuner? Thanks!

Hi guys. I just got a tune done on my VE V6 Commodore 2009 3.0l international SIDI 6 speed automatic. Firstly, I don’t want smartass answers, or v8 owners going on about how their extra 2 cylinders suddenly make them have the biggest dick in the world, if I could legally drive a v8 I would...

Hey Guys, Wondering if anyone else has taken up the GM Motorsport August Intake & Tune special offer? I have a VF2 SSVRL ute Auto & I got mine done yesterday... left the exhaust stock and just went for Ramjet 3 Intake and the tune... Certainly made a big difference to power right across the...

Hi All, I am looking for someone local in the Penrith, NSW area that can read the tune from my VX LS1. The car was mafless tuned about 9 years ago and produces very nice smooth power. My original tuner is no longer around or at least I can't track them down. I am about to sell the car, but...

Hi guys my ve l98 ssv is idling all over the place since cleaning the throttle body and MAF 3 days ago.. ive done idle relearn and TBS relearn. But idle it still playing up abit..its been draining the fuel the past 3 days like ive gotten 70kms out of 30litres....how much would it cost to tune it...

I need to replace my throttle body on my 06 Calais and I was just wondering would I need to get it tuned after I change it? I'm thinking of going to the wreckers and getting one from an old VZ would that make any difference from buying a brand new one?

Does plugging in a maf sensor into a mafless tuned ecu affect it in anyway? my understanding is it ignores input from maf and reads another input

For the VZ V6 guys that are sick of throttle lag, these suit the Holden VZ V6 High Feature Alloytec now. Revhigh Checkout the reviews on our facebook page!! :) https://www.facebook.com/revhigh.obsessions.5/?fref=ts

Hi guys i have a vp ute with a home made twin throttle body and wanted to know how to tune it and stop it idleling so hard thanks

Hey guys I have a vs commodore with these mods: 4.2 stroker Comp cam: -216°/216° at .050" -Intake Lift .317" (.507" lift at 1.6:1 rocker ratio) -Exhaust Lift .317" (.507" lift at 1.6:1 rocker ratio) -111 LSA T5 manual conversion with manual ecu and loom Mildly ported heads Extractors...

Hi I'm looking for someone that can make a custom memcal for me will to pay all cost and pay for your time

Hi, i have done some intake mods and cat back exhaust, now i want to get a chip, i want wandering is there a set up where i can get a memcal that will suit my set up? or can i get something to do the programming my self? i would love to be able to do my own programming as everyone in my...

Wondering where I can get my VE Series 1 Omega tuned (4spd Auto). It has 12mm manifold insulators, quad tip dual exhaust, and an Orssom OTR intake. I have a USB-OBD cable so remote tune is also an option. Heard MACE has stopped tuning the Alloyecs?

FYI Noobie. Hey I have recently started modding my car and wondering what the best tune would be for it. I have read through threads but was wondering what tune would be good for my car in particular with the mods below. Car - 2005 VZ SV6 Alloytech190 Modifications - MACE CAI - MACE...

hey all got me car running as best as I can with the mail order tune. its not ideal, but it drives fine. just doesn't idle properly and feels a bit sluggish for what it is. the motors 10.5 comp with a crow 4761 cam. motor had a freshenup a few years ago. I realise mail orders cant tune...

Been on here for awhile but thought I'd start being more active on the forum. Here's a little back story; Girlfriend crashed her "fully hectik" Mirage (Evo rims/bodykit, jetpilot and fox stickers, sub/amp and lowered) :banstick: A few months later and we find out she's pregnant so I got...

Hi guys, I have just purchased a stock 1996 vs executive, with duel fuel and 140,000 kms on the clock. This weekend I'm getting 5 new tires(including spare) and a service. Is it worth getting the car tuned ? I'm not looking for more performance, just fuel efficiency and reliability! Please help.

Does anyone live around Milperra and know of a good reliable experienced place where I can get a good affordable tune for my VZ? Looking to get this done in the next few months but want to make sure I get the job done well! Cheers peeps ^.^ (Totally feel like I post too much.)

Hey guys just considering what tune to go with I went to HDT yesterday and they want $800 to tune my sv6 sidi ute or MACE ONLY charge $550 for there flash tune and ghost cam set up, would love to hear people oppions on both? I will be getting a orssom OTR aswell before the tune :)

Ok, I have a MY12 SV6 SIDI LFX ute that is manual. I've been looking at an OTR for it as I know that mace have been working modifying them for the LFX for some time now. Is it worth putting an OTR on a V6 ? I'd want to put the VCM one on as I know many people with them on their V8's, and they...

ITEM: LS1 OTR Air intake mafles LOCATION: act CONDITION: Used PRICE: $350 DELIVERY/PICK UP INFORMATION: pick up only, possibly deliver myself to some locations PAYMENT OPTIONS: COD, Direct Deposit CONTACT DETAILS: [email protected], pm, 0427 967 670 (txt Only) OTHER...

Hey all, Just wondering if anyone has bought one of these and what your thoughts are? HOLDEN RECALIBRATED COMPUTER/PCM TO SUIT VU-VX V6 HOLDEN RECALIBRATED COMPUTER/PCM TO SUIT VU-VX V6 - Mace Engineering Group I've been considering it but would love to hear some opinions? I currently...

I just installed an ss induction growler and a Xforce 2.25 catback and i was currious do i need to tune the car or not? im also thinking about going for headers and cats but in 2 months time.. furthermore i was thinking about making it look better please share your ideas and btw its in...

I have a stock VT V6 Executive. The usual exterior/interior mods. Just looking at a few things to increase performance for a cheap price? (Like everybody else, I know.) I am on my P's, also. I'm going to be getting the exhaust, extractors, hi flow cat etc. done soon. What are peoples...