clutch

202 black/blue. 5 speed New clutch. Replaced thrust bearing. Have tried multiple cables. Clutch just isn’t engaging and no resistance on pedal (straight to floor) . And ideas?

I’ve recently bought this vz 2005 sv6 commodore, and two months into it the rattling clutch sound progressively got worse over time. Ever since I dumped the clutch at 4000 rpm’s to do a skid the clutch rattling has gotten worse. I’m thinking it’s the bearing but need reassurance from you guys...

Hey guys, I have a vs ecotec that I did a getrag manual conversion on a few months back, I installed a brand new clutch kit with solid flywheel, got it going all good then about 500 or so kms later, I started to get a grinding sound every now and then on the grab point of the clutch when I'd go...

G'day. Bought the manual ute brand new October 2008. Within 6 months the clutch was slipping. Holden replaced the whole clutch assembly from pedal to flywheel including cylinders lines and thrust bearing flywheel pressure and clutch plates. Just now pulled the motor out to "freshen It up" and...

Hi guys, had a dragging clutch so have pulled apart clutch assembly to replace necessary components, just need help identifying what flywheel I have as I know you can't reuse the dual-mass ones if they're too far gone. 2007 VE sv6 manual (aisin ay6), 330000km. Due to the Ks of the car I don't...

Hey Guys, Just wondering if anyone could give me some help with my clutch. I recently have just had the motor rebuild. I put the motor back in with a new heavy duty clutch, flywheel and slave cylinder in. The sound only occurs when I am taking off. So when I press down the clutch no sound. It’s...

I’ve got a 1982 Wb ute that I’ve just started as a project. It’s got a 202 in it, was originally a 3 on tree but was converted to a 4 on floor. Got a problem with the clutch, however. It’s stuck to the floor. Car goes in to gear fine when the car is off but when the car is on it doesn’t go in...

Hi I have a 2002 V6 VX Spac commodore I need to replace the clutch what’s everyone opinon on the blue steel heavy duty clutch? Or could someone recommend a decent heavy duty clutch cheers

Hey guys I’m just wondering if anyone knows what the recommended mileage you get off the factory Holden clutch. My Cars done 160000 on factory clutch. I’ve had other manual cars but they Jap imports and I’ve never gotten mileage anywhere near as much as this clutch has done. (Still going) and...

Hi guys, I changed my master cylinder on my clutch today for my VY V6 and since then it is leaking fluid out from the hydraulic clutch line. No matter how tight i do the bolt it continues to leak like a siv. Any suggestions?

Hey guys, new member here (knows basically nothing compared to what im sure you guys do) Sooooo basically i brought a vs ute when i was about 15-16 (now 22) thrashed it with a friend was mid burnout with 18s on and the clutch went limp (no pressure on pedal just flops around now) had to drive it...

hey guys, I’ve got a 2001 WH statesman l67 Okay so I’ve had my air con regassed professionally and pressure tested, there’s definitely no leaks and we’ve replaced the o rings with genuine ones, pressure checked it again 24 hours and still holds pressure But the air con clutch will not engage...

Hey all, trying to sort out an issue for a freind.... ve series 2 sv6..... replaced the dual mass with a single mass..... they cannot get the clutch to disengage... He had a crack at bleeding it.... I have since redone it.... doesnt appear to have any more air and the pedal feels good.... you...

Hey guys, I’ve got a 1996 vs Commodore ute with a 3.8l 6 cylinder and the clutch pedal sits about an inch from the floor and is an inch lower then the break pedal, it feels fine driving with the clutch, i’d just rather it was the same height as the break pedal as it’s easy to stall, how do I...

Hi all just wondering, i have a VR with a T5, i recently bought a pedal spring that pushes the pedal up, now my pedel is "unadjustable" so does the GM spring push the pedel to the floor or and i adjusting it incorrectly?? Thanks

I'm starting to need a new clutch in my 2010 L77 SS-V. Just after peoples advice on which clutch to choose. I've been looking at the Exedy twin-plate organic which is about $2800 installed. Other people have suggested Z-grip's or NPC's - no idea on how much or where to get these. The car will...

I have been trying to find any information regarding an sidi conversion into a vz manual ute. yes i have searched the fourms and all i can find is people saying just v8 swap its easier, v6 is a waste of time, ect, so if thats what your thinking please keep it too yourself. Im looking for any...

Pretty certain it’s diff related but it only started happening yesterday, at low speeds a clunk in the rear occurs when turning sharp both left/right, when turning right up a hill it felt like both were about to lock up but just shuddered. No whine or anything driving or any clunks 20kmh+ Drives...

Hopefully someone can help. I'm completing a manual conversion in my vs club sport but for some reason the clutch will not disengage . I've checked the cable and pedal which all seems fine. But the clutch is stuck on the whole time. The clutch and thrust bearing are brand new. Any suggestions...

Hey I'm converting my 99 vs ute from getrag to t5, I got an 8 bolt flywheel from the wreckerz along with everything else I'd need to convert the gearbox successfully. I removed the getrag along with the cluth and dm flywheel only to find two locating dowels, the 8 bolt flywheel i have doesn't...

Hi everyone, just wondering what was the factory clutch for a 5spd vx. Did they come out with a single or double pressure plate? Thanks

Hey Guys, Looking to buy a heavy duty clutch kit for my 2010 VE SSV Redline but I can only find clutches suited for the L98 engines. I have been looking for an Exedy clutch but cant find any L77 suited. Was just wondering is there a difference between the two? Or if anyone can point me in...

I’m just wondering. I have a 2012 ve series 2 and the biting point of the clutch it’s high compared to the normal manual car. Will I need to replace the clutch?

VS III V8 Ute stuck in first and reverse sometimes with the clutch engaged. Will creep unless i have my foot on the brake. If im in traffic and cant take off only option is to stop, turn off the ignition, Double the clutch which will release shifter from gear and start again. Usually in first...

Hey guys, new to the forum here. So last night I got abit angry and started caning my VT S manual which I just bought about a week ago, the car is in my name and had a rwc done too. Let me start off by saying the clutch before this issue happened, the friction point was 2 inches in when you put...

Hi, i have a VS ute manual (getrag 260) onto the v6, ive owned the car for nearly a week and ive notices that the car is either spinning the wheels like crazy or some crazy clutch slip. heres my evidence, please help! - the LSD is rooted and could just be spinning one wheel? - the speedo...

I'm just throwing it out there about EXEDY clutches and how piss weak they are and how they don't back there own warranty. My EXEDY Heavy Duty Sports Tuff Clutch SMF conversion for my 2012 Holden ute 3.6L SIDI that I paid $1,200 for has failed in a big way with less then 20,000KM on it (6 months...

Hi All, I have a 1993 Holden commodore VR or VS ute and it won't go into gear. The clutch is always all the way in and having to use force but still won't go in gear. Could really use some help

Okay so the problem started a few days ago I was driving home accelerating quite hard and heard a large metallic *bang* and metal shrapnel go all over the road. I had pulled over and turned the car off about 300m later checked under the car, saw nothing. As I went to start the car back up all it...

I'm wanting to change my automatic 2000 series II V6 VT commodore over to a manual transmission. My question is, is it possible to fit a manual transmission out of a 2001 V6 VX and what would be needed?

Hi All, So recently i have had trouble changing gear, and whilst up on a hoist a couple of weeks ago i adjusted the adjustment on the fork at the bell housing end, and noticed a slight improvement, now yesterday whilst driving to the shop, the clutch pretty much failed, i couldn't shift out of...

Hi team, Whenever i get excited and decide to give the clubby a bit of throttle and then go to change gears at high RPM, the clutch seems to grab at a very low point i.e. the clutch pedal is almost all the way in and sticks a few cm's from clutch pedal pushed all the way in. It feels like the...

DESCRIPTION: Wanted to Buy ITEM: Cover plate to suit 5L V8 with a T5 gear box LOCATION: Mildura, Vic. CONDITION: New or Used DELIVERY/PICK UP INFORMATION: Will pay postage. PAYMENT OPTIONS: Bank transfer. CONTACT DETAILS: PM, email- [email protected], call 0409554699...

Hello on the way home yesterday I took my ute out of 5th gear and tried for 4th wen my clutch pedal dropped in feeling funny and I could then not select any gears until stopped on side of the road with motor not running cannot get her into gear while running...... It was suggested to me that the...

Hey guys, just after some ideas/thoughts. Ive got a VY SS M6, on the way home from work this arvo i heard a snapping sort of sound then the gear disengaged & i couldn't get it back into gear, none would work. The clutch was springy & would push down to the floor. Although when i turned the...

Hey guys, have had my VE ss for a few months and few times when driving it hard the clutch has got stuck halfway out. and then slips, under normal driving conditions its fine and never gets stuck or slips. tends to be worse when the cars hot. can lift it back up with my foot and is...

hey guys i have a 2003 vy SS 5.7L v8 when i change up and down gears and release the clutch i have a small grind around 3000 rpm it does it when the clutch it about half way out it doesnt do it when i change gear at low RPMS it does it in all gears i have a heavy duty clutch

ITEM: 2008 VE SSV Clutch LOCATION: Adelaide CONDITION: Used PRICE: $700 or Make an offer DELIVERY/PICK UP INFORMATION: Pick up in Adelaide or can deliver at cost of buyer. PAYMENT OPTIONS: COD CONTACT DETAILS: 0459824484 OTHER INFO: Clutch has done 20,000kms, still in...

Hi Everyone, I've got a 2001 VU Commodore 5sp Manual. The issue i'm having is a rattle that comes out only at idle when i'm sitting in neutral with the clutch OUT. It sounds like something in the clutch, and when i rev it the noise goes away. If i put the clutch IN, the noise goes away...

..........