which way pcv valve?

[wato44]

Hello again, sorry to annoy everyone, im doing the inlet manifold gaskets on the vu v6 ute, pcv valve was covered in oil and sludge so I have a new one. Im sure I pulled it out with nozzle pointing up and the spring over that with the "can" part at the bottom . Is that correct? Many thanks !
"

 

[mechanic]

Blow through it - it should have a one way valve inside it.

Align it so air flows out of the engine into the inlet manifold.

 

[wato44]

Blow through it - it should have a one way valve inside it.

Align it so air flows out of the engine into the inlet manifold.

hello, I appreciate your reply and yep your right, a one way valve , so the neck or nozzle faces up. Thanks!

 

[Lex]

hello, I appreciate your reply and yep your right, a one way valve , so the neck or nozzle faces up. Thanks!

If l remember correctly the spring goes to the bottom of the pcv. It wont fit with the spring to the top (plenum wont go on).

 

[wato44]

Actually spring on top it hugs the rim where the nozzle meets the body. Thats how I pulled it out originally. Ill soon find out!

 

[Lex]

Actually spring on top it hugs the rim where the nozzle meets the body. Thats how I pulled it out originally. Ill soon find out!

I must have mine the wrong way? Or l'm remembering wrong? hahaha

 

[wato44]

Lex , lex, lex! Now neither of us are gonna get any sleep!

 

[Lex]

Lex , lex, lex! Now neither of us are gonna get any sleep!

Just been looking through the how to. All the pic are missing.
Here is the link to https://forums.justcommodores.com.au/forums/holden-commodore-how-tos.40/