2000.vx.exec
Member
- Joined
- Aug 10, 2020
- Messages
- 42
- Reaction score
- 5
- Points
- 8
- Age
- 21
- Location
- South Australia
- Members Ride
- 2000 VX Executive, 1998 VT Exec 304 manual, 2007 S
So I've decided on getting a Centrifugal Supercharger kit and I was wondering on what I'd need to change in the car for it to run 10psi. The Raptor Supercharger kit states that no tune is needed with 7psi but how much more power would that produce as opposed to 10?
Would forged pistons/lower compression ratio and a different crank be necessary? What would need to be done to the ECU, what else is not necessary but would be good to add on? And the 4L60E is rated to handle 450Nm, would 10psi exceed that amount considering the L67 develops 380Nm at 6psi?
Thanks guys
Would forged pistons/lower compression ratio and a different crank be necessary? What would need to be done to the ECU, what else is not necessary but would be good to add on? And the 4L60E is rated to handle 450Nm, would 10psi exceed that amount considering the L67 develops 380Nm at 6psi?
Thanks guys
Last edited: