boombaby
New Member
- Joined
- Jun 29, 2023
- Messages
- 24
- Reaction score
- 12
- Points
- 3
- Age
- 124
- Location
- Perth, W.A.
- Members Ride
- VT ii
Hello, Any/Every!
I'm gettin' there. Patience!
The fundamental issue is that I have been trying to nail-down a Commodo VT V6 Ecotech
"stalling" issue. (We love those don't we!)
I will be asking each of you to give an opinion - BUT - rather than getting 10/20/50
people providing 10/20/50 different "things" I will be happy if 1/2/3 different
diagnoses become the serious contenders. (I hope I explained that well enough.) Later,
I will explain exactly "WHY" I'm asking for your advice/help this way, now.
Some Background...
On various occasions, in other posts, I have mentioned a couple of my VT issues. However,
since I will be making this as the main/direct thread about them, I will briefly describe
the problem(s) and my diagnostics so far.
Main theme... "Sudden stalling, after which VT fails to start immediately (ie WILL
re-start after a waiting period)". This is not a consistent condition on every drive;
it occurs out-of-the-blue, sometimes weeks/months apart.
In recent months I have been dragged off into bundles of other critical activities so I
have not been able to attend to this enough. (Fortunately, I have not had to rely on the
VT for many trips.) However, on last Saturday I had to do several short hops, but on the
2nd hop it failed to start after being parked for about an hour; and on the 3rd hop it
stalled on the way back home. (I'll get back to those moments, shortly. The rather odd
outcome from those events became the motivation to seek your advice/input now.)
Quick background/ on my efforts so far.
1. 2016, bought VT with 161k's for a low price.
2. Always ran well - but I never maintained it. (Save the criticism; I know it's slack!
This is my first Fuel Injection - and I thought it would be much easier to repair if
problems arose. Turns out DFI works better if it is maintained constantly - using
bucketloads of money. Tonnes and tonnes of money. Yes; that's a very weak argument
BUT it's the only one I've got!)
3. Recently, at 175k's, the "stalling" issue raised it's ugly head. And it is pretty
ugly. DFI (and the GMH design) is my new learning curve.
4. Cleaned MAF; replaced air filter, oil, alternator, battery. Purchased Vident scanner
which is showing the vehicle is running just within limits, but on the "rich" side.
At the moment that (alone) does not prompt me to a solution.
5. After checking all sensor activity and clearing codes the VT seems to settle on code
?-47-? "missing 18x signal". [I know that COULD be pointing directly at the CAS, but
I have also read that it could be a sign of failing/failed power packs or connections
(etc) too. From memory, I think that's right.]
However, I DON'T want you to focus too much on that stuff at the moment; I only want you
to keep it in mind when I tell you about last Saturday.
So, in terms of ME narrowing down the "stalling" issues, here's where I'm at:
1. It could be the CAS.
2. It could be the fuel filter and/or fuel pump.
3. It could be one (or more) of the DFI module or coil packs. [Someone told me
that after the car stalls feel each of the 3 coil packs with the back of fingers
because it can reveal that one is excessively hot - and failing/failed. (Well,
I have one hot, one intermediate, and one OK.)
REASON FOR MY SLOW PROGRESS (apart from being otherwise occupied)...
To resolve (one or MORE of) these issues the wrong way could be expensive. I have read
enough posts about lucky people spending thousands of dollars - yet still have the same
problem - that I have been wanting to get a better FOCUS (ie info or advice) on the
REAL/ACTUAL problem before committing to "Go-time".
Now, to last Saturday...
First trip: Weather temp 37o C. Car runs normal and fine; water temp is good. Parked
20 mins. Re-start; off we go.
Second trip: Weather temp 39o C. Car runs fine; temp good. Parked 60 mins (good shade).
Won't re-start. After several re-tries about 30mins apart - 2 hours later
car starts.
Third trip: Weather temp 39o C. Car runs fine; water temp is good. Conks out half-way
home (after about 1 km). Won't re-start. I move into zombie mode - wait 20
to 30 mins before re-try.
While waiting to re-start, one of the local lads came flying past on an (mi
e-scooter. He stopped to offer assistance. He said that he has experience
with Commodores and VT's. I mentioned to him about the "cold-water-on-the-CAS"
trick for a re-start. He's never heard of it. (And I've never tried it.)
Since I had about a cupful of ice-water in my freezer bag I discussed trying
it. "Brad" (might not be his real name) thinks it should go on the "harmonic
balancer". (?) Anyway I slowly pour the cupful of chilled water on the CAS.
Before I know it, "Brad" (might not be his real name) pours his warmish
drinking water on the "harmonic balancer" (actually the belt tensioner!). I
try re-start. (Belt squealed a bit.) Nuttin'! "Brad" (might not be his real
name) suggests holding accelerator to the floor. (I don't want to because
the Manual says "don't", but what have I got to lose? I'll be dead soon; it's
39oC. "Sun temp" is actually about 56oC !) No start. Due to the excessive
cranking my past experience tells me it will be another 40mins before I can
try again.
"Brad" (might not be his real name) comes to the driver's window and mentions
about the "immobilizer" being a problem sometimes. (The sun's getting to me.
"What's he on about?") He is suggesting re-locking the doors, then unlocking
them again, and trying for another re-start. From past experience, I know
this won't work (ie trying another re-start "immediately", like that) but what
have I got to lose? I've already got a wet pulley-tensioner!
To satisfy Brad's (might not be his real name) insistance in the diagnosis I
alight the vehicle, lock the doors then re-open them. I get back in to give
it a go. STARTS!! What?! WOW! I mean W O W !!!! It powered to life in
a flash, even after all that cranking (and fuel-flooding?) that I did just
40-ish seconds ago. W O W !!!
I thanked "Brad" (a lot), then left to get home quickly - before another
"stalling" episode.
Fourth trip: I made it home (1km), no problemo.
NOW, LET'S TALK ABOUT THIS A LITTLE...
Either "Brad" is correct and the Immobilizer/Keypad is part of the malfunctioning - or something
else just happened.
1. The key was replaced about 5-ish years ago - so it could be the key's battery? Could be
something else in the ignition connectivity?
...OR...
2. The chilled water on the CAS had a delayed effect (ie the "chill" took time to travel along
the sensor stem to sensor tip inside the engine?
REMEMBER, this episode that I bring to you might not be - wholly - about the "stalling", but
ONLY about the "re-starting".
So here is my request to each of you. Apart from any issue that might really be a solution to
the stalling, do you think the RE-START issue could be:
A. the chilled water on the CAS that was the rapid solution (no pun intended)?
OR
B. the immobilizer/key/battery was/is the whole (or major part) of this problem of failing
to re-start?
OR
C. something else?
While I'm happy to entertain valid ideas on the stalling (but I've read many, MANY similar
stories anyway) I guess I'm wanting this immediate post/reply to be focussed on the amazing
RE-START, as it happened. What do you think solved the re-start so rapidly? Chilled water?
Key? Other?
[FYI: On the stalling, I will be looking further at the 3 options mentioned earlier. Clearly,
the outcome of your vote/discussion on the key/CAS thing might help drive me in one direction
or another. (Pun intended). And, for the time being, I am thinking they are the only options
that need to be considered.]
So, please, feel free to jump in with your vote/comment on the key/chilled water thing. (Even
a useful opinion will be appreciated.)
Regards,
boombaby (might not be my real name)
I'm gettin' there. Patience!
The fundamental issue is that I have been trying to nail-down a Commodo VT V6 Ecotech
"stalling" issue. (We love those don't we!)
I will be asking each of you to give an opinion - BUT - rather than getting 10/20/50
people providing 10/20/50 different "things" I will be happy if 1/2/3 different
diagnoses become the serious contenders. (I hope I explained that well enough.) Later,
I will explain exactly "WHY" I'm asking for your advice/help this way, now.
Some Background...
On various occasions, in other posts, I have mentioned a couple of my VT issues. However,
since I will be making this as the main/direct thread about them, I will briefly describe
the problem(s) and my diagnostics so far.
Main theme... "Sudden stalling, after which VT fails to start immediately (ie WILL
re-start after a waiting period)". This is not a consistent condition on every drive;
it occurs out-of-the-blue, sometimes weeks/months apart.
In recent months I have been dragged off into bundles of other critical activities so I
have not been able to attend to this enough. (Fortunately, I have not had to rely on the
VT for many trips.) However, on last Saturday I had to do several short hops, but on the
2nd hop it failed to start after being parked for about an hour; and on the 3rd hop it
stalled on the way back home. (I'll get back to those moments, shortly. The rather odd
outcome from those events became the motivation to seek your advice/input now.)
Quick background/ on my efforts so far.
1. 2016, bought VT with 161k's for a low price.
2. Always ran well - but I never maintained it. (Save the criticism; I know it's slack!
This is my first Fuel Injection - and I thought it would be much easier to repair if
problems arose. Turns out DFI works better if it is maintained constantly - using
bucketloads of money. Tonnes and tonnes of money. Yes; that's a very weak argument
BUT it's the only one I've got!)
3. Recently, at 175k's, the "stalling" issue raised it's ugly head. And it is pretty
ugly. DFI (and the GMH design) is my new learning curve.
4. Cleaned MAF; replaced air filter, oil, alternator, battery. Purchased Vident scanner
which is showing the vehicle is running just within limits, but on the "rich" side.
At the moment that (alone) does not prompt me to a solution.
5. After checking all sensor activity and clearing codes the VT seems to settle on code
?-47-? "missing 18x signal". [I know that COULD be pointing directly at the CAS, but
I have also read that it could be a sign of failing/failed power packs or connections
(etc) too. From memory, I think that's right.]
However, I DON'T want you to focus too much on that stuff at the moment; I only want you
to keep it in mind when I tell you about last Saturday.
So, in terms of ME narrowing down the "stalling" issues, here's where I'm at:
1. It could be the CAS.
2. It could be the fuel filter and/or fuel pump.
3. It could be one (or more) of the DFI module or coil packs. [Someone told me
that after the car stalls feel each of the 3 coil packs with the back of fingers
because it can reveal that one is excessively hot - and failing/failed. (Well,
I have one hot, one intermediate, and one OK.)
REASON FOR MY SLOW PROGRESS (apart from being otherwise occupied)...
To resolve (one or MORE of) these issues the wrong way could be expensive. I have read
enough posts about lucky people spending thousands of dollars - yet still have the same
problem - that I have been wanting to get a better FOCUS (ie info or advice) on the
REAL/ACTUAL problem before committing to "Go-time".
Now, to last Saturday...
First trip: Weather temp 37o C. Car runs normal and fine; water temp is good. Parked
20 mins. Re-start; off we go.
Second trip: Weather temp 39o C. Car runs fine; temp good. Parked 60 mins (good shade).
Won't re-start. After several re-tries about 30mins apart - 2 hours later
car starts.
Third trip: Weather temp 39o C. Car runs fine; water temp is good. Conks out half-way
home (after about 1 km). Won't re-start. I move into zombie mode - wait 20
to 30 mins before re-try.
While waiting to re-start, one of the local lads came flying past on an (mi
e-scooter. He stopped to offer assistance. He said that he has experience
with Commodores and VT's. I mentioned to him about the "cold-water-on-the-CAS"
trick for a re-start. He's never heard of it. (And I've never tried it.)
Since I had about a cupful of ice-water in my freezer bag I discussed trying
it. "Brad" (might not be his real name) thinks it should go on the "harmonic
balancer". (?) Anyway I slowly pour the cupful of chilled water on the CAS.
Before I know it, "Brad" (might not be his real name) pours his warmish
drinking water on the "harmonic balancer" (actually the belt tensioner!). I
try re-start. (Belt squealed a bit.) Nuttin'! "Brad" (might not be his real
name) suggests holding accelerator to the floor. (I don't want to because
the Manual says "don't", but what have I got to lose? I'll be dead soon; it's
39oC. "Sun temp" is actually about 56oC !) No start. Due to the excessive
cranking my past experience tells me it will be another 40mins before I can
try again.
"Brad" (might not be his real name) comes to the driver's window and mentions
about the "immobilizer" being a problem sometimes. (The sun's getting to me.
"What's he on about?") He is suggesting re-locking the doors, then unlocking
them again, and trying for another re-start. From past experience, I know
this won't work (ie trying another re-start "immediately", like that) but what
have I got to lose? I've already got a wet pulley-tensioner!
To satisfy Brad's (might not be his real name) insistance in the diagnosis I
alight the vehicle, lock the doors then re-open them. I get back in to give
it a go. STARTS!! What?! WOW! I mean W O W !!!! It powered to life in
a flash, even after all that cranking (and fuel-flooding?) that I did just
40-ish seconds ago. W O W !!!
I thanked "Brad" (a lot), then left to get home quickly - before another
"stalling" episode.
Fourth trip: I made it home (1km), no problemo.
NOW, LET'S TALK ABOUT THIS A LITTLE...
Either "Brad" is correct and the Immobilizer/Keypad is part of the malfunctioning - or something
else just happened.
1. The key was replaced about 5-ish years ago - so it could be the key's battery? Could be
something else in the ignition connectivity?
...OR...
2. The chilled water on the CAS had a delayed effect (ie the "chill" took time to travel along
the sensor stem to sensor tip inside the engine?
REMEMBER, this episode that I bring to you might not be - wholly - about the "stalling", but
ONLY about the "re-starting".
So here is my request to each of you. Apart from any issue that might really be a solution to
the stalling, do you think the RE-START issue could be:
A. the chilled water on the CAS that was the rapid solution (no pun intended)?
OR
B. the immobilizer/key/battery was/is the whole (or major part) of this problem of failing
to re-start?
OR
C. something else?
While I'm happy to entertain valid ideas on the stalling (but I've read many, MANY similar
stories anyway) I guess I'm wanting this immediate post/reply to be focussed on the amazing
RE-START, as it happened. What do you think solved the re-start so rapidly? Chilled water?
Key? Other?
[FYI: On the stalling, I will be looking further at the 3 options mentioned earlier. Clearly,
the outcome of your vote/discussion on the key/CAS thing might help drive me in one direction
or another. (Pun intended). And, for the time being, I am thinking they are the only options
that need to be considered.]
So, please, feel free to jump in with your vote/comment on the key/chilled water thing. (Even
a useful opinion will be appreciated.)
Regards,
boombaby (might not be my real name)