VE V6 Delphi ignition coils

[lmoengnr]

Hoping some of the VE V6 experts on the forum can tell me which engine these coils belong to.

Found these at the bottom of a box of junk from my dad's workshop, all new and the boxes were unopened.
@Fu Manchu , do you recognize these?

 

[losh1971]

Does it say where they were made?

 

[Fu Manchu]

They look like VE coils. Is there 3 or 4 pins in there?

 

[lmoengnr]

Does it say where they were made?

No, just this on the back of the box.

 

[lmoengnr]

They look like VE coils. Is there 3 or 4 pins in there?

It says VE on the box and the connector has 4 pins.

I know they're not coils for an LS, and there's 6 in the set, so I'm assuming they're for an Alloytec/SIDI.

 

[DavesSV6Tonner]

Delphi Ignition Coil Igc-277a for Holden Commodore Ve 3.6l V6 Set of 6​

Just checked the part number on the Delphi coils I put in our VE SV6 LLT engine about 3 years ago. They are IGC 277D and have four pins.
Looks like the IGC 277A has 3 pins.

 

[07GTS]

IGC-277 is the coil number, any letter after it is just the brand if they arnt OE brand,
generally looks like they suit
VE LY7 3.6, LEO 3.6, LF1 3.0, LW2 3.6, LLT 3.6,
VF LWR 3.6, LFX 3.6, LFW 3.0

 

[lmoengnr]

Delphi Ignition Coil Igc-277a for Holden Commodore Ve 3.6l V6 Set of 6​

Just checked the part number on the Delphi coils I put in our VE SV6 LLT engine about 3 years ago. They are IGC 277D and have four pins.
Looks like the IGC 277A has 3 pins.

These have 4 pins.

 

[greenacc]

They look like the coils that suit the VE LE0 engine.as 07GTS said.
After I think mid 07 the shape changed and the rubber insulator that slips over the tip of the spark plug became longer.
That's interesting to hear Holden decided to use them again 7 years later in the VF.
What's written on the top of the coil near the bolt?
Send them to me I'll use them on my LFW for a few years and see if they're any good

 

[DavesSV6Tonner]

These have 4 pins.
View attachment 260234

OK better pic. The pic you put up earlier I can only see 3 shiny dots in the connector housing.