Bogan23
New Member
- Joined
- Jul 30, 2021
- Messages
- 4
- Reaction score
- 1
- Points
- 3
- Age
- 29
- Location
- Wellington nz
- Members Ride
- Vt commy
Hey guys im new to all this and not sure where to post this thread
I have put a 3.8L v6 in a 1980 ex lancer and am stuck now at the wiring. I have the whole loom from the donor car (VT commodore) but don't know alot about the wiring and i have the wiring diagram for it.
I need to get rid of the BCM and have the fuse and relay box inside the passenger side foot well up high. I dont need the fuel pump or fans done as ive wired them separately. Ive removed the ac pump there is no dash or abs so literally only need wiring to start and run the motor and trans and the alternator to charge the battery.
Has anyone done this before and able to give me some clues on how to do all of this. I have a guy that can disable the bcm from the ecu or however its done
Thank you in advance
I have put a 3.8L v6 in a 1980 ex lancer and am stuck now at the wiring. I have the whole loom from the donor car (VT commodore) but don't know alot about the wiring and i have the wiring diagram for it.
I need to get rid of the BCM and have the fuse and relay box inside the passenger side foot well up high. I dont need the fuel pump or fans done as ive wired them separately. Ive removed the ac pump there is no dash or abs so literally only need wiring to start and run the motor and trans and the alternator to charge the battery.
Has anyone done this before and able to give me some clues on how to do all of this. I have a guy that can disable the bcm from the ecu or however its done
Thank you in advance