Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
15X7 on SSL springs
- Thread starter redvtwags
- Start date
VF2R
Well-Known Member
- Joined
- Jun 24, 2022
- Messages
- 270
- Reaction score
- 527
- Points
- 93
- Location
- Marlborough NZ
- Members Ride
- 2014 VF SV6 Ute/ 2016 VF2 SS-V Redline
I had FE3 in my redline ( lower than FE2 ) and when I put super lows and GTs in it dropped another 25mm. Maybe it depends on the brand? I've got FE2 in the VF (sv6) and it sits pretty high...the FE3 was maybe 15mm lower than FE2.
vc commodore
Well-Known Member
- Joined
- Jun 18, 2014
- Messages
- 10,809
- Reaction score
- 12,872
- Points
- 113
- Location
- Like the Leyland Brothers
- Members Ride
- VC, VH and VY
My VC is fe2 pedders springs and it's 50MM lower than standard....
The front of mine is 350 from centre of the wheel to base of wheel arch...I'm 10 MM to low at the front to be legal....I should get 10MM spring rubbers to lift the front to legal height, but it's been like that for 10 years, since I first put the springs in another VC and no copper has ever queried it
Rear...I'm 310Mm from centre of wheel to base of wheel arch....I'm 10MM higher than minimum legal height there.
I'm running 16X8 with 225/50X16...
The front of mine is 350 from centre of the wheel to base of wheel arch...I'm 10 MM to low at the front to be legal....I should get 10MM spring rubbers to lift the front to legal height, but it's been like that for 10 years, since I first put the springs in another VC and no copper has ever queried it
Rear...I'm 310Mm from centre of wheel to base of wheel arch....I'm 10MM higher than minimum legal height there.
I'm running 16X8 with 225/50X16...