throttle

Hey lads I was hoping someone could help with how to reset the Throttle position sensor. The butterfly flap was moved on the throttle body and is now idling at around 1600rpm rather than 550 Found plenty on older models and 6ltrs but not sv6 Cheers

Hello, I’ve recently had some issues with my 2008 Sv6 Commodore Ute, hoping someone could point me in the right direction :) 1)My car has had some bad throttle response, I’d put the foot down. And it wouldn’t want to give me any throttle, then give it to me all at once. I took out the MAF...

Hi all, I have a V6 ZB, bought it second hand with ~47k on the clock ~6 months ago. I'm pretty happy with it in general, but I am confused by a couple of things. First, the auto start/stop feature. My car has the button to disable it, but in the ~6 months I've owned it, I have never once had...

Hi all, Does anyone know how in-depth it is to hack the LS2 in the SS to run a cable throttle? The delay in the software is driving me nuts and making precise control a real chore (perhaps there's a hidden setting/safety exacerbating the delay? I do intend to reflash the PCM in the near...

G'day guys So yes, i broke the flimsy plastic thread on my calais' throttle cable but that is not the point here. So i go down to repco at wingfield and pick up a new one with a metal thread, get home and pull the old one out and what's this... its too short. Next day i go back to repco and ask...

Hi everyone, my car has done this to me in the past few days and I've noticed it only does it on a cold start. When I start the car it's fine, but once I start driving down the road that's when it plays up. With my foot is off the accelerator, but it continues to pick up speed and when I put me...

I need to replace my throttle body on my 06 Calais and I was just wondering would I need to get it tuned after I change it? I'm thinking of going to the wreckers and getting one from an old VZ would that make any difference from buying a brand new one?

For the VZ V6 guys that are sick of throttle lag, these suit the Holden VZ V6 High Feature Alloytec now. Revhigh Checkout the reviews on our facebook page!! :) https://www.facebook.com/revhigh.obsessions.5/?fref=ts

Hey guys ... asked around in the l67 forums of facebook with no answer. just wondering what the standard size of the throttle body is for a L67 vt commie. and the Injectors LB for L67. tried googling all this with no answers again.

Hey, been trawling threads for a few weeks now and having similar problems to a lot of people but no solution yet 3.8L v6 VG auto ute idle in drive, overdrive and reverse is intermittent and will conk out when slowing to a stop, doesnt have any dramas idling in park also conks out in full...

I finished installing my new throttle body and when i went to start it my engine light came on, is this supposed to happen or did I install it incorrectly

Fixing up the 94' VR V6 and got one issue that I just can't seem to scratch off the list (beginning to frustrate) In idle with no load, the car will rev smooth with no problem, occasionally jumping up then back down and then coming back down. Whilst in gear and idling, it will run rough and...

Fixing up the 94' VR V6 and got one issue that I just can't seem to scratch off the list (beginning to frustrate) In idle with no load, the car will rev smooth with no problem, occasionally jumping up then back down and then coming back down. Whilst in gear and idling, it will run rough and...

Hey everyone, so for a while on my VS Ute when it gets below 1/4 of a tank it has a major flat spot (when I stab the throttle to get up a hill it chokes and splutters and nearly stalls before picking up power again), any suggestions on what it might be or if anyone has had this problem how they...

VR Calais S2 stalling whenever i move in gear. dash flashes when changing into gears and abs off light comes on when no brakes or handbrake is on? car also takes a bit to turn over since these problems have started.. any ideas on where to start with all this? pretty sure my throttle...

Had a look on the forum the other day for anything relating to cleaning the throttle body on a 3.6ltr. I was having trouble removing the wiring loom to the throttle body. I eventually got it off and thought I might put a how to thread on how to do this. It fairly easy and shouldn't take any...

Good day, I have a Holden Commodore VZ 2006 which is sold in the Middle East under the name of Chevrolet Lumina, i have searched the forum (and i do whenever i have any problems with my vehicle) and thought of posting this as most of the solutions proposed did not workout. Please watch...

Hi there Having some trouble with my 2001 Vu ute V6 manual Say when changing from 3rd to 4th I accelerate in 3rd to 3000rpm then push clutch in and let off the throttle it stays around 3000rpm (sometimes slightly increasing) and doesnt drop untill i change to 4th, when i accelerate...

Hey guys I really need some help. I drive a VT executive and I love it but I really want to modify it some how. I have seen some videos and am interested in doing some stuff to the car but I'm not completely confident in my ability to do so. I have read in some places that tightening the...

Hi guys new member to the forum but long time user of your vast knowledge (ass kisser but i need help)... Well here's the low down on the problem. For about 10-12 months now my vy executive (auto) has been struggling to start without me giving it some throttle. It has gradually gotten worse...

Whenever i start the car it can start from inbetween 2k-4k revs. when i looked at the throttle body on engine one of the cables seems very streched, how can i fix this?

Hi Guys, I have a 93 VR which i just put a 70mm Throttle body on and need some advice on possible adjustments Just a bit of backstory, when i first put the new TB on, the engine idled at over 1500 RPM (with the old TB it sat at around 1000) so i had to adjust the close stopper so the butterfly...

My vs v6 series 2 ecotec has a flat spot when stabbing the throttle. I've replaced plugs leads fuel injectors, cleaned throttle body and plenum. I'm lead to believe its non electrical as no fault codes are present. Any help at all is appreciated. Cheers!

G'day, i've just finished following the guide on how to clean the throttle body etc on my vn. But when i took the spring off ive totally forgotten how it goes back on. i've had a crack at it for awhile now and cant figure it out. im not the most cluey with these things but now im panicking...

Hi y'all, I've got a drama with my VT Olympic that is driving me completely mad. The gear changes are all off pretty much all the time - sometimes it will stick in a gear when it should be changing or it will change down when it shouldn't. It's also randomly throwing a TPS error and...

ITEM: VN throttle body CONDITION: Used, has working sensors. missing throttle linkage. PRICE: $50 ONO ------------------------------------------------------------- ITEM: VN drivers seat rail, left part. CONDITION: Used but good condition. PRICE: offers...

When I accelerate while driving, there is a loud sound coming from my air intake system / throttle body. It comes on suddenly when accelerating and is distinctly louder than the normal sound it should be making. I have heard my air intake could be sucking in air from a small hole or gap...