exhaust

Edit: Mine is the one on the right Okay so I have gone thru two egrs due to snapping the pipe after I realised the pipe isn't actually long enough my manifold is the series two I believe cause the thread where you attach the EGR pipe is up higher so my question is. Is there anyway to modify the...

Hey guys, Lining up to get the following done including OTR air intake and tune: Manta Exhaust Package - 1 7/8 or 1 3/4, 4 into 1 Extractors - Multilayer Manifold Gaskets - Hi Flow Catalytic Convertors - Full Stainless System Your choice of Muffler or Hotdog Centre I was just wondering if...

Hi I have a 2010 international 3.0L and wanted to replace the mufflers to make driving it a bit more fun. I was wondering if any muffler meant for the VE commodores would work for the 3.0L version I have. I was looking at these redback ones. Or these rapid exhaust ones. Thanks

Thought you guys might enjoy this short clip with the new DEA exhaust I got to help legality after my SH 40$ muffler snapped in half. New hangers on there as well. The setup is Pacemaker extractors with Pacemaker Y pipe onto Unknown brand 2.5inch cat SH and onto new DEA exhaust. The motor is...

delete pls

Hi, I have recently just bought a 2012 V6 3.0L VE omega and am looking to put a new exhaust on it. I am confused as to which commodore exhausts will fit on my car e.g will a Ve ss or sv6 exhaust fit to an omega or are they all the same and universal, Thanks

Gday all First post but have been creeping the hallways for a while now. I’ve found a lot of info on here really helpful when building knowledge on mods, so thanks to everyone who adds to these threads. I have a Harrop H02 cam (224/232 .610 114) in my Gen F2 Clubsport SV black (LS3). Great to...

Since I'm having to go down the road of custom extractors since there are no off the shelf options for my particular Statesman, I'm needing some advice with my choice. The engine is the supercharged V6 l67 in a VS III STATESMAN. Currently has a Press bent 403 stainless 2.5 inch catback. Y pipe...

Hi all, I have a vz one tonner S and need help with modifications, mainly the exhaust. I plan to do a full system But can’t find a decent stainless one for the v6. I can find mild steel cat backs but have been advised to go stainless by a few people. I also plan to do up the engine as it’s at...

Hey all! New here so apologies if this isn't posted in the right area. I recently bought a MY12 VE Calais Series II V6 3.6L Sedan. Wanting to keep it mainly stock but I'd like to get a bit more rumble out of it. Not looking to wake the neighbours or anything but hoping to get some...

Ive just brought off a friend of a friend, fairly new XForce Twin 2.25in Cat-Back Exhaust for my vf sedan for only $200. And brand new is just over 1.3k but, it’s for a Ute ‍♂, is there anyway I can make it to fit a sedan? will the tips just stick out the back or will it not fit altogether? Are...

Hi everyone, I was just wondering if anyone has tried chucking blast pipe exhaust tips on a VE Commodore? I'm planning a JDM/drift inspired build but I can't seem to find examples. I mainly want to know if the look can be pulled off effectively without looking janky. Thanks for any help :)

currently looking at upgrading my exhaust it has this catback rear muffler delete (current exhaust) but I would like to get a louder exhaust as this isn't as loud as I thought it would be. but a person at work with the same car as me showed me how his sounded and it was a lot louder and had pop...

I'm looking for a nice sounding but cheap exhaust for my fully stock v6 Vy, but I don't know much about exhausts or cars, so far I've found 1 exhaust I kind of like, and was just looking for some more options. and anything I should be aware of when buying an exhaust. not too bothered by how...

ITEM: HSV VF 340 Pack (2.5 inch) mid section exhaust Stainless Steel mid section with flexible flange for rear muffler bolt-on Front flange fit cut short for multi-fit option.. will need to weld flange or OEM join depending on use. Same mid-section system as VF GTS and as fitted to the VF...

Noticed a slight exhaust leak between the exhaust pipe and rear muffler of my VE Berlina and want to purchase new gaskets to help seal the leak better. VEO Online has multiple sizes and I want to know if they matter all that much and if so what size I should buy. It's the 3.0L V6 for reference.

Hey guys I have found an ad for a full exhaust system - hurricane extractors and cats and xforce exhaust - for a vz ute, I was wondering if it would fit onto my wagon?

Hey everyone, I've just bought myself a 2017 v6 calais v. Would've loved to go for the 6.2 to match dad's redline but unfortunately I'm on my p's for another 3/4 years. I want to replace the exhaust on the calais, but I don't know what to change it to. I want a little bit of a note and a little...

Hey guys just curious will installing 2.25 inch catback exhaust system from xforce onto a VF SV6 be necessary with a VCM OTR install?

So I have a 2013 SSV running a vcm 16 cam and I have a full 3” exhaust system that sounds great but is too “tame” on idle for my liking considering the cam I’m running I want the car to sound more aggressive at the lights etc. the exhaust starts with 1 7/8” mild steel headers then straight onto...

Howdy, The commodore I have is my first car and I’m just looking to do little things that will improve it and improve the overall enjoyment for myself. I’ve been looking at deleting my muffler and replacing with the following pipe…. Was just wondering whether this is the same circumference as...

Hey, does any ecotec owner know the size of the rear muffler. Not the piping the muffler itself I’m after a new one slightly smaller to get some noise from her but can’t find anything online about their dimensions. Already expecting the don’t waste money on a V6 exhaust comments but aye oh well...

Hey all, first time member here. Got me a vf2 ssv redline fully stock. Keen for a better note to come out the back end. Is it worth spending the extra money to get a full exhaust? Or, is a 3” cat back decent enough? cheers

Would anybody know if I can buy a vy Series I cat back exhaust and put it on vy series II? Are the exhaust hangers the same?

Can't find the answer I'm looking for so I hope someone hear can help, i got a 2010 (oct) Ve series 2 ssv wagon but can't find if the exhaust layout is the same between the pontiac G8 & the VE SS. The sedan & wagon exhausts are the same given their both 1. The same wheel bace & 2. The same...

If you have a vy series 2 v6 with series 1 cats dont order an aftermarket catback, just get one made. I've ordered a series 2 and series 1 catback exhaust neither fit. If you have 1 cat then its a series 1. If you have to cats though you should be right to get a series 2 exhaust. Now i gotta cut...

Hi, just wondering if anyone has installed a catback exhaust on a VF Evoke? Would anyone recommend the Holden take off catback system from JHP? Any videos of what it sounds like on an Evoke? Not wanting something that drones too much, just a nice note when I push it. Cheers :)

Hi guys I've had my cam upgraded and a stage 2 kit with upgraded servo put in my transmission. I'm looking to upgrade my Exhaust system to a stainless steel one. I was wondering what people's recommendations are. I have been looking at a Xforce stainless steel 1&3/4inch extractors, 3inch...

Hi guys I recently had a custom 2.5 inch exhaust installed in my VY v6 ecotec and have been getting deep hollow low frequency vibrations and sounds in 1500-2000 rpm. I asked the exhaust shop if it was drone and they said it might be due to worn engine mounts. We have changed the setup to 2...

Hi All, I need to replace my rear muffler on my VS Ecotec V6 which has IRS suspension. I am looking for any brands/types that people can recommend. The current muffler is rusted. The car doesn't do a lot of kilometres or get used during the week. Apparently it is a common problem for these...

Hi guys wondering if anyone has any clips of any custom catbacks or full exhausts they got made up at an exhaust shop for their ecotecs. Asking as online i couldnt find any "custom" exhaust clips for it - mostly seen ebay exhaust videos... Can anyone also recommend any setups with a somewhat...

Hi everyone I dare say this has been covered before but couldn't find any information 2003 vy v6 series 2 185km So my issue is on a cold day I go to start my car it starts fine splutters a little bit as if it wants to stalls tops of 5 seconds then the choke will kick in and she is...

I've been looking for an exhaust for a bit now. I was just wondering what exhausts everyone uses and also if having a dual exhaust is better for performance and sound over a single exhaust. Cheers

Hi everyone, i recently bought an sv6 VF commodore sedan not too long ago, and it has the stock exhausts on it, i want my car to be louder but not too loud to where i will gain attention from cops.. I wanted a noise like the straight pipes with hot dogs but didnt want it that loud, and was...

Hey guys, I have a VE Commodore and want to do a cat back on it and get a dual exhaust system. I am unsure of what parts I actually need, obviously, I will need the exhaust system itself and the rear diffuser, but nothing online has anything about anything else or how to actually do it. If...

just wondering if anyone’s drilled a hole/holes into their stock exhaust and what it sounds like.

Hi all, be gentle, this is my first time. So I'm a first time ss owner. I am wondering if anyone can tell me anything I can do to lower drone between 1500 and 2500rpm? I've got cams, headers and 3inch exhaust system with no muffler, just hotdogs..And also, if you live in Brisbane, the best SS...

Hey just wondering if you can put the cats section from a v6 supercharged on an na v6 header and bolt up the twin exhaust. I’ve been trying to find info but has been difficult to get a straight answer cheers

Looking at new exhausts online and the v8 systems and v6 systems look like they come off the extractors at similar points. My question is will a V8 CatBack system fit on my V6 stock extractors without too much hassle. I'm hoping they do so I can have the fatter pipes . Thanks guys.

Hi, I’m looking at doing a complete intake and exhaust haulover/repair/dyno with my VF Series 1 VF (L77 Engine). I’ve already got a crap Chinese OTR CAI and factory sports exhaust fitted, but want to really go all the way I can to improve performance/sound beforeI give it a new cam and dyno...