Search results

Has anyone put a vt fuel pump in a vp? Ive got a new vt pump here and the one in my wagon is on its way out i think. When it is under a 1/3 of a tank it cuts out going around right hand corners and roundabouts. Matt.

Does anyone have any ideas why i would be blowing holes in the top off oil pressure sensors. This is the second time it has happened, last time it kept blowing the fuel pump fuse every time i turned the car on. I dont have a oil pressure gauge but im guessing it must be high, possibly from a...

A family member has a rb30det out of a vl in an eh holden. The first motor he had in there had a blown head gasket from when he brought it, so he pulled an rb30 out of a r31 skyline he had sitting in the paddock. After putting the motor in he started it and it is running really ruff and the...

I started making a toy, it is everything out of a vp with a frame attached. I just need to finish welding the main frame out, then i want to mount the seats and fuel tank before i finish making the rollcage ect. Heres a few pics of it at the moment. Matt

I have decided to sell a few manifolds the same as the design i have just made for my turbo v6. I can make them to suit series 1 or series 2 and either on the drivers side or passanger side. When i put mine on the wagon i noticed a big improvement in throttle response but didn't drive it far...

NAME: Matt MODEL: 1992 Vp Commodore Wagon(executive) COLOUR: Royal blue top and quick silver with a light prizmotec coat on the bottom BODYKIT: Standard Vp with modded vn grill ENGINE TYPE: 3.8ltr v6 ENGINE MODS: none, Just a T70 turbo bolted to it. POWER: Unsure, hasn't been on a dyno yet...

Does anyone know if your able to get cometic head gaskets for the pre ecotec motors, i rang rocket ind. but they said that u can only get them for ecotecs. cheers Matt

i have been having some dramas with my wagon, for the last month, when give it full throttle it will rev to about 3000-4500 then start breaking up, i thought it might of been fuel related but yesterday it started preigniting, so i was thinking it might b CAS related, does this sould like the...

I need to move the battery out of the engine bay of my vp wagon, does anyone have any pictures of a battery in the boot of a wagon? and know what the legal requirements are? (ie sealed box) or any info i might need to do this. Cheers Matt

Im after a flywheel for a vp v6. Thanks Matt

Will a series 2 manifold fit onto a series 1 motor? if not will the s2 heads fit onto the s1 block? the reason i want to know is i picked up a stroked s1 motor and want to fit the new series 2 inlet manifold i made onto it, so any info on what is interchangable and what would be better would...

A mate has a vs ss and it won't start, it blow a hole in the top radiator hose spraying water every where, so he replaced the hose put some coolant in and had it running while adding some water, then it just stopped and now it won't start, it has lpg and fuel, we tryed both and it has spark, any...

how does the anti theft module on a vp work does it cut the power to the coil packs so it wont spark? Matt

My car was playing up heaps a while ago, and would cut out and when i turned the ignition on the check engine light wouldn't come on and the car wont start, but i could arc C and D out on the diagnostic link with the ignition on and the check engine light would come on and the car would start...

is there a differance between petrol and diesel turbos, if there is what r they? Thanks Matt

what size pipe would be better for a sc14 from the charger to the cooler to the t/b 2 1/2 inch or 3 inch Matt

what colour are the tops of standard injectors on a vp v6, are they black or cream coloured? Matt

i did a search but couldn't find anything. has anyone done this and can tell me what is needed to do it? if there is a thread about this can someone show me where it is? thanks Matt

when upgrading to a smaller pully on a sc14 charger how is the front plate with the spline on it connected to the pully?, is it bolted on through the 3 bolt holes on the plate? if anyone has the smaller pully from crs can u post up pics of it? cheers Matt

i brought a vp belina and was looking under the steering wheel when i noticed a bunch of wires that had been cut (2) and want to know what was there, also i found a plug that isn't on my vp exec and want to know what its for (1) and also the thing at the right of the pic (3)? thanks Matt

What would happen if the vacum line on the brake booster was getting boost instead of vacum? would it make the brake pads to be press against the rotors when it is on boost? The reason i ask is because my front pads started making bad noises and when i was replacing them they looked like they...

i checked the fault codes on my mates vs ss today after the check engine light came onand got Code 15 - ECT Sensor - Voltage Too High, Code 16 - ECT Sensor - Voltage Unstable What is the ect sensor and how would he fix this? Thanks Matt

Does any one know of an easy way to get the air con pully off. I undid the bolt at the front, took the front plate off, then took the sir clip off. but i couldnt get the pully off?

:ranting: ok got my sc14 running the other night and it feels like it has halved the performance of my car. when i put the foot to the floor from standing start it is really sluggish and doesnt want 2 go, when driving along and nail it to about 3/4 throttle it takes off and goes well but if i...

:dance: finally its on and running :D feels wicked 2 drive even though its only got the 3psi pully on it for now, it feels like it has a lot more pull mid range and it isn't as loud as i was expecting, all up it has cost me $320 so far but alot of f###ing around at work trying 2 fit it and...

does the pcv hose have 2 go into the intake pipe or can i put one of those miny pod filters on it? and where do i hook the 3 vacume hose that r on the charger 2? what is the best oil 2 run in the charger and how much? nearly finished my sc14 kit just the pipe work 2 go. hopefully finished...

might b a stupid question but anyway do the buick v6s have a rev limiter? if they do what should it b? im asking cause mine reved a bit over 6000rpm tonight on my way home from work. its an auto if that makes any differance.

does anyone have a drawing or anything showing the dementions for mounting brackets for a sc14 on a vn-vr. I have search the forum but no-one has posted them.

i got a tacho dash out of a vs for free and was wondering if i could modify it to fit into my vp exec?

does anyone have a wiring diagram for a vp 92 model that they can email me or post on here regards matt

i was just looking round on the net and came across some infothat said that the oil pressure sensor is on the same pin on the aldl as the fuel pump test i have been having a problem with my vp stalling intermediatly while driving and when i try to start it again the check engine light dosent...

i was just wondering if anyone had a rear strut brace.

been having some problems with fuel pickup in my wagon. won't start on hills sometimes and has cut out going around roundabouts. could it be something wrong with the fuel tank. it has a new pump.

Does anybody know what a torque converter does when it is on its way out and the appox price of replacing one. My car makes a weird noise when it is in gear but not moving. the noise goes away when its in neutral or park and is only present when it gets up to running temp and it sounds like...

is there any way of fitting a sadan rear seat 2 a wagon:confused:

has anyone got msd ignition on a vp v6. r they any good and how much do they cost? Where do ya get them from? (autobarn???) any info would be appreciated as i want to get them next week if they r worth getting?

Does anyone know what to disconect when welding on the body of a car eg. computer, battery. need 2 cut some rust out and want 2 weld a new bit in its place with a tig.

Does anyone know the Queensland laws about cutting a hole under the air box? I wanted to cut a hole and vent the air from the front of the car into an custom alloy air box i'm making at work.

:bang: started my car 2day after about a week of sitting to let it warm up and noticed when i rev it a little white smoke and water r coming out the exhaust pipe, the more revs the more smoke and water, with about half throttle its shooting alot of water about 2-3 metres, and the smoke is thick...

my car has started making a weird rattling scraping noise when i put it in gear but not driving, when i start driving the noise goes away. any suggestion??? doesn't sound like is coming from the gearbox (auto)