pulley

Hi all, Was just hoping if anybody could tell me whether or not I need a longer belt when running the mace air to air setup with a 3.4” pulley? I was told by someone locally I wouldn’t have to, but I have doubts about that. I’m assuming I’d just add the 52mm in height to the 1755mm length of...

Hey, bought a new Tensioner with belt for this 2010 VE 3.0ltr (SIDI). It came as a kit on cheap. Installed the new tensioner and then thought I'd install the new belt as well, only it was alot shorter...pull up the haynes sure enough theres 2 routing configs, one with and without the idler...

My VE has got a very noisy idler pulley. At first I thought it was that tensioner pulley so I change that. While the belt was off I felt the water pump a bit loose and noisy so I change that. The fan belt is still quite new and it's been sprayed with WD-40 belt conditioner but the noise will...

Okay Ive put an l67 in my VT commodore that I bought and went to put the belts on but the pulleys are wrong! The belts don't fit on properly, some pulleys look smaller such as the idlers under the coil packs than what they are on pictures. The main pulley is the idler pulley next to the AC...

Need new pulleys for my VY but I'm not sure if I should by them through Holden or online. From Holden they're about $280 for the lot and online they're about $140 ( https://www.ebay.com.au/itm/182268525515 ). The person selling the pulleys online said the Holden dealers are plastic and that...

Hey guys. I plan on putting a 2.8inch (16psi) pulley for my Vt 98. Im getting the funds together and will be getting MACE's A2A intercooler kit and i would like to know other possible upgrades down the track before the pulley is installed and the tune is done. thanks in advance

Does anyone in Perth have a supercharger pulley remover tool? That I can borrow or does anyone know where I can get one??

Hi Guys, This weekend i'm doing a big service on my sv6 with my dad. Bought a new radiator (90 bucks), water pump (30bucks) and a pipe for the aircon (current one is leaking). I also have this annoying bloody squeak on cold start up that I want to get rid of (since I'm pulling apart a fair...

Call me old fashioned but I still get kicks from steering the old vn ss through road trips to shopping trips, the sound & pull of that aussie 5l, the ease in which that barge arse steps out, the way it handles at high speed & the simplicity of being able to work on your vehicle. -Sure it drives...

DEAR ALL Would request members with their expertise and experience to advice me on the actions as under: My Statesman WH requires a new Drive Belt, Drive Belt Tensioner and Pulleys. Drive Belt Tensioner: Was wondering whether to get Genuine Holden or Dayco tensioner. According to my...

help! I cant figure out how to get my air con pulley off. the bearing is shot. If I knew how it comes off I feel sure I could do it thanks in advance for any help

Hey there everyone, just been browsing the pulley bros site to purchase a pulley for my setup and am wondering what boost I should be getting Basically I want about 8psi and I WILL be running an intercooler with 3" piping I don't want to buy a pulley only to find that I am now running 6PSI and...

The serpentine belt is the main belt on the front of the engine which runs around a set of pulleys. Its actually very simple to change despite how complicated it can look. I did this on a vs ecotec not sure if its the exact same with other models (vn, vp vr, vt). What you need: -...

Hi just wondered if anyone knows of a mechanic workshop in adelaide that has the puller to remove my supercharger pulley? cheers

Im getting the 10psi pulley upgrade on the weekend. :lock: I currently have standard NGK spark plugs, Standard leads (replaced 100kms ago) and stock coils and factory thermostat. The car has 160 000kms on the odometer. Will i need to upgrade any of the parts mentioned above when I...

Anyone know what size hex(torx whatever they are called) key i need to remove this sucker...don't really want to buy an entire large set! Thanks

----------------------------------------------------- NOTE 1: For heaven's sakes, I'm not a qualified mechanic - so assume that everything I'm about to tell you is bollocks. I have NO idea what I just did today, and I honestly have no idea whether it worked. For now, I'll just assume that the...