ls1 5.7 conversion

Hi just wondering is vy l67 accelerator cables same as ls1 thanks

Ive brought an vu ss manual ute wanting to swap the running gear and eveything else I need into vz storm auto ute. has anyone done it before and have any pointers first time doing it. I know I need: Vz engine loom vz ss ecu battery loom pim module tac module pedal module Is there anything else?

Just completed an ls1 conversion on my vt and it won’t get spark an fuel pump won’t get fuel unless bridged I’ve just linked a new key aswell but still nothing Was thinking it could be a immobiliser issue but unsure Everything is plugged in on the motor I’ve been through the fuses and relays...

Hi Everyone I am doing a LS1 conversion on my VX V6 auto executive. I am just after some help on the wiring and PCM/BCM and what I should do there. My car being an executive has a low BCM which I did a Power window conversion on a while back and I bypassed the BCM as per threads on here. I...

Hey guys, first time posting here. I got myself a vz one tonner S recently and I want to look at my options for engine conversions down the line. It's currently just the stock alloytech and 4speed auto but it's got 320,000km on it so I don't plan on trying to get over a year with it. I also...

Hey guys im doing a ls1 conversion into my vr calais i have everything ready to be put in but i need help with what to do about fuel pump im after something plug and play to run my ls1 its a stock motor not cam or anything can someone please help me with what to do about fuel thank you

Hello, going crazy to try to find the ECM pinout for a VY SS with LS1. I swap this engine on a Jeep with manual transmission and big cam. I would connect the Clutch Pedal Position sensor in the ECM to help idle when start but found only auto trans pinout referring to Range Selector PRND pinout...

Hey guys just woundering what this is worth? March05 HBD VZ SV6 FACTORY SUNROOF AUTO PADDLE SHIFT. Yes it isn’t the prettiest car but but I think it’s perfect for my build plans Thinking on getting it for a doner car for my ls1 running gear. Got offered to clean swap my clapped out factory...

Hey guys, I'm just posting to try clarify some stuff. I have a WH gen 3 ls1 as a donor car. I want to put the ls1 in my vu ute. From reading here I know what parts need to be swapped but I was wondering with the whole ECU and BCM difference. Can I just swap it all, cluster, ecu, bcm, the wiring...

Hey Guys, I've been trying to learn as much as I can about project cars, at a beginners level, as a long-term hobby and project as it's something I've always wanted to and really respected people who do it. My family just wasn't into cars. I do, by chance happen to have access to a mechanics...

Hi all, does anyone have the relevant information to unpin the harness to make it stand alone struggling to find accurate information on how to do this for the Australian harness

Vz Ls1 stuck in safety mode. No throttle. Need to test tps then pedal. Any quick tests for tps or pedal sensor? Also any places in NZ that sell used ls1 commy parts need cheaper option than Holden. Any advice would be appreciated. Cheers. Bathurst Weekend coming up!!! Can't wait.

Hey guys, I’ve just finished converting my VZ Calais from V6 to V8, and it now has a miss on cylinders 2&3 under acceleration. Dash loom, engine loom, bcm, pcm, pim all replaced. Plugs, leads and coils have been changed, injectors have been checked. Happens around 1400RPM then smooths out...

I have a v6 vp commodore in the garage and I'm hoping to getting in to powerful machine I'm looking at an ls1 conversion. Is there anybody out there can help with figures or know what sort of tips I can ask for. Project car is a v6 vp commodore Want to drop a ls1...

Hey all got a couple of vps around my place I'm pulling apart one and not sure where to go with it.And i have a another one which is for work. Any ideas to get the vp that I'm pulling apart would be awesome , I'm hoping to make it 10 second ride yeah. Soo if I was to keep it v6 what would be the...

ive just done a ls1 conversion from a VX into my vg ute, can't seem to find anyone to answer my question with the 2 out lets on the water pump housing, 1 is for the heater and the other goes under the bottom radiator hose to the overflow bottle which is actually the filler bottle in the ls1's...