Search results

this one is from my dashcam in 2017 lol dude was drunk with his kids in the car but everyone was ok, 8500+ in damages to the vehicle

i am doing my 100k service on the zb(2018 rs v6) so i will share some things to look for if you do your own maintenance i would suggest that you purchase all of the parts you are replacing before you start because with the zb there is no going to the auto store the next day etc with many of the...

i started to get a bit annoyed with that lag part at the start of the throttle in my v6 so i decided to give a throttle controller a go because i have one in my colorado and that works well. i got one from mace which is the idrive evc525 but you can buy it elsewhere...

this will just allow the development menu in the settings in the 7 inch mylink found in the LT and RS. you basically tap 10 times on the home menu then enter 20130822 then go back to the home screen and into the settings and at the bottom will be development options. it is pretty much useless at...

this is a manual based on the 2018-2019 buick regal(ZB commodore). it is 9000+ pages of mess but can be very useful ;) Zipped PDF Manual EDIT: i will add these here too... MY18 Commodore Brochure PDF MY18 Commodore Owner Manual PDF Service and Warranty Booklet PDF

this is a basic retrofit for the auto dimming mirror found in the upper spec zb commodores. this is still on my bench but i will update this thread once installed but this is the pinout i have worked out. this mod is simple as all you need is ignition switched power and to tap into the reverse...

first off i will point out that i will update this thread as i test/prefect the mod. this is pretty much a mod for the s48e multifunction switch infront of the shifter which makes a pretty awesome vehicle even better by adding the ability for the switch states to be remembered through vehicle...

a bit of info if you are looking to install some subs into the zb. this was done on a rs or a zb with the 7 inch mylink screen. the silverbox is on the drivers side up under the dash, you will see a plastic cover and there is a single 7mm screw at the very front holding it in place. undo the...

has any one else had the issue where android auto disconnects 30 seconds after enabling it? i am thinking it might be a software issue.

EDIT: kayhan are useless at aftersales support and will probably never respond to your emails for help so keep this in mind before purchasing. I got a unit to play with so I will post the info here so others can read before buying one. some specs on the unit: CPU: Spreadtrum SC9853I x64 1.8GHZ...

I wonder how much they will sell it for and how will this sale impact parts and warranty over the long term. some places might end up not having a local holden dealer if inchcape closes the current holden dealers. interesting times ahead :D

I am not a part of this company i just had this come up on facebook today and thought it was worth the share because if i had found this when i owned ve's i would have got it so it might be useful to someone here...

there are 2 DIY ways to control the electronic bi modal valve controllers using arduino. one uses the factory type PWM and the other requires you to cut the controller open and modify it. I just went with a simple momentary switch to toggle the valves but you could use a remote relay like...

local dealers here are starting to take zb orders having them listed "in transit" i would have thought a new sub category would be ready to go or is that going to be a whole new site "JustInsigniadores" lol no matter what side of the fence you are on you should take one for a test drive, i will...

just finished adding drls to an evoke and thought a share of info might help someone else out. if you want to add drls to your evoke with a factory look then you want to source parts from a vf international as the front of the international is the same as the evoke. your evoke has the mounting...

if you are not sure what I mean by auto window up it is where you hold the window up switch for 1 second and let it go and the window goes up by its self. it seems the vf povo pack evoke does not have this but all the other models do so I modified my ve auto window arduino project to suit the...

I finally got around to upgrading my povo pack vf with a sat nav mylink I scored for $200 and of course they are vin locked. so I figure I will share some info on the eeprom for others to diy vin program with a cheap Chinese programmer. it is handy to learn about eeproms and have a programmer...

it started flooding here and my ssv is leaking inside the cabin but its not from the usual places like the heater units air intake through the firewall or a blocked drain plug this is higher. I have tracked it to somewhere above the heater core pipes that come through the firewall its not the...

i have changed the center gauge in my ssv. from this one. to this one. the center gauge which is the oil temp does not work and i have read that the oil temp needs to be enabled to broadcast on the can. so i thought i should ask if anyone can confirm that this can be done with the...

I bought this 2.5 inch exhaust today for $70. I have 2 manta mufflers. and also have these delete pipes. I don't know much about exhausts so I figure I would ask what would be the better setup to use. I have the factory/stock exhaust on with the delete pipes at the moment and its a ssv...

the early model ve's only have auto window down which kind of sh*t me to tears as my colorado and vf have auto window up. so using Arduino I have made a small mod for my ve to add one touch window up and I thought I would share it here for other duinogeeks. it cost me around $45 all up and...

stooge submitted a new Showcase Item: 2016 Holden Colorado ltz Read more about this showcase item here...

stooge submitted a new Showcase Item: 2007 Holden Ssv Read more about this showcase item here...

stooge submitted a new Showcase Item: 2014 Holden Colorado ltz Read more about this showcase item here...

stooge submitted a new Showcase Item: 2014 Holden Sv6 Read more about this showcase item here...