Search results

I've been missing for AGES ..... what been happening and how is everyone in v6 land ? I see the infamous GOAT TT setup has finally been installed and working .... anyone else done anything interesting or new ??

I am currently having issues with a cammed V6 I am having an intermittent issue with mine where once the engine is on full load from 1500 - 2500 RPM the engine starts to splutter with error codes: P0101 - Mass r Volume Air Flow "A" Circuit Range/Performance P0102 - Mass of Volume Air...

Anyone here ever had issues with their MAF sensor on the LFX ? I seem to be having an intermittent issue with mine where once the engine is on full load from 1500 - 2500 RPM the engine starts to splutter with error codes: P0101 - Mass r Volume Air Flow "A" Circuit Range/Performance P0102...

Hey guys has been a while since I've posted. The commodore has had many changes so here is a quick list of what I can remember. Havent had a chance to go to the track for ages due to some issues with the car, with the latest one looking like a faulty MAF Engine: VCM air intake VCM...

Just wondering which race fuel people have used in either their VF or other cars for track use ? I have Elf and VP available to me however the VP is a higher octane level by nearly 6 points. I haven't looked at Martini or any other yet so open to suggestions as well.

I haven't even really started to look at suspension options yet however its about time I did. For those who have replaced their stock suspension with either coil-overs or insert/spring options could you please let me know what you got and what you think of them on your VF ..... 6 or 8 doesnt...

Hi Everyone, Some of you already know the good news but for those who do not we have had another VF Commodore here in AUS install and tune these cams from the team @ MACE Engineering and we are happy to share the positive results with you. This particular vehicle started off with ~190rwkw...

Hi Everyone, Some of you already know the good news but for those who do not we have had another VF Commodore here in AUS install and tune these cams from the team @ MACE Engineering and we are happy to share the positive results with you. This particular vehicle started off with ~190rwkw and...

So whilst I am up in sunny QLD for a holiday I took the LFX for its first test 'n' tune session at Willow bank. I am happy with my 3 runs and the VF got a bit of interest in pre-stage from other holden guys. 14.995 @ 95.81 14.852 @ 95.71 14.774 @ 96.82

Hi all, Have been on a long holiday so time to update on a few things. I bought a Vitesse Throttle Controller from the states last year after reading a lot of good things about it on the Camaro5 forums however upon its arrival I found out that the wiring harness had changed from the VE to...

Hey guys I'm chasing a fabricator for an alloy plenum/manifold, I have been in contact with Micks Metalcraft and Shaun's Custom Alloy, but wondering who else in Sydney I can go and have a chat with. Cheers dan.

ITEM: VF Front Side Vents (gloss black) LOCATION: NSW / Sydney CONDITION: Near New PRICE: $40 DELIVERY/PICK UP INFORMATION: Pickup (peakhurst) or meetup elsewhere PAYMENT OPTIONS: COD CONTACT DETAILS: PM OTHER INFO: These are GM original items which were placed onto my car...

I am playing around with a data logger and ipad/phone dongle with my OBD port in the VF and I would be interested in understanding where the ECU exactly obtains the reading for the intake temperature ? Is it inside the plenum or at the MAF ?? Does anyone know ?

I'm looking for a work shop that would be passionate about helping me with my VF SV6 project. Unfortunately I haven't had too many people interested in helping develop aftermarket systems and bolt ons for this engine because many are focused on the LS series V8's which is understandable as it...

Hi All, I am potentially looking at getting a car up from Sydney to to North Queensland. Can anyone please recommend and such services that they have personally used in the past ? Please don't tell me to 'Google it' as I have, but I asking for real world experiences and customer...

if you are like myself an looking at a new wheel and tyre packages then you might be interested in this page Tire Size Calculator - Compare Tire Sizes

Hi guys Just wanting some input on LSD and ratios from those with personal experience using them in either v6 or v8 capacity. I am tossing up between RTS, wavetrac and harrop for the main unit and 3.9 get set to go with it. I hear some of the rts units can be noisy? I have heard good...

Anyone with an aftermarket exhaust on their v6 would you be so kind as to share what system you got and how it sounds/performs (in your own words) And if you could change anything to your setup what would it be ? Eg, 2.5 inch cat back with xxxx mufflers and hot dogs - drones a little on...

Hi I know wraps are not painting however they come under the same exterior finish category. Can anyone suggest a good well priced vinyl wrapper in Sydney ? The only quote i got for doing my roof of my 2013 VF Sv6 was $350 which I feel is a bit pricy considering you can get a whole car...

Hi Guys, I have one of the these APP sensor devices from Vitesse Welcome to VITESSE MOTORSPORTS and I am going to install it on my new SV6. The sales and engineering team have been very accommodating and helpful with my questions, however I am at a point where I need help from the community...

Hi Guys, My Mate and I have made a custom CAI for my SV6 (LFX) and I am needing to know how important the spout is that goes to the rear of the engine on the right bank ? I assume that this is part of the PCV system ? We have made the pipe up and I have simply placed a small valve cover...

post removed

Does anyone know if the mid section on the standard VF exhaust (V6) is straight through pipes where the resonator/muffler is ? ? I am looking to do some exhaust upgrades by changing the cats installing an X-pipe and changing the rear mufflers but if the mid section needs changing due to it not...

Hiya Wondering if anyone has had a personal experience or know of anyone who has with Ricol Automotive (holden commodore or other) in Peakhusrt Sydney ? I went in and had a chat to Colin one of the owners over the weekend and seemed like a nice guy and not a w4nk3r. I don't know any...

looking forward to receiving this item in the coming days. I understand that there may be cosmetic surgery required if I want to place the engine cover back on ? (which I will as the plastic manifold looks disgusting IMO) is this going to be on the underside of the engine cover or somewhere...

Guys need some direction if the v6 versions of VE and VF share the same size rotors ? Reason is I have seen a good price on some v6 VE cross drilled and slotted rotors which will be a great upgrade for my VF Cheers Dan

Hi all, Going to be setting up the dirty side oil catch system this weekend. I have bought a generic no baffled can from ebay with a drain plug and I will make up a baffle and stuff it with steel wool. The question I have is around a cleanside system ? Clean-Air Oil Separator - Elite...

Hi all, I'm proud to say I am a brand new and first time Holden owner :) I picked up an optioned VF SV6 on Saturday and I love it. 2 things however that I need to buy ASAP are - lock nuts for the 20" wheels which came with the car - After market Alarm system I have seen some black...

Danthuyer submitted a new Showcase Item: 2014 Holden Commodore Read more about this showcase item here...