Search results

Hey guys, just wondering if anyone can recommend a good hop I build the 5l bottom end. Would like to get the block cleaned, honed, zero decked, oil mods and galleries done and the entire bottom end rotating assembly balanced. I'm after someone who will do a good job. Also if there is anything...

Hey guys just started tearing down the 304 for the new car. Turns out its a virgin bore, because i bought it from the boganist people iv ever meet (dead set the women that came out acted and sounded like one of the characters from houseos) i decided a full rebuild it was. The ute will just be...

Iv managed to score everything needed to convert the ute to a 5L. However being a 93 motor for a 96 shell, how legal is this? Iv read to different answers over and over again but with no definitive answer. One person claims i can do it, another claims i cant. As most threads were from 2010, i...

Just started building my new computer, as i use my computer mainly for watching movies, i thought i should build a multimedia computer. The plan is to dual screen 2 32" LCDs, one for movies for the misus to watch and my to either play a game or use the net. So i just bought the following: EDIT...

Quick question, i keep blowing pumps, my lid has the long piece snapped off. My guess it needs this to operate properly. Is this correct?

Hey guys, looking to upgrade the computer as i just bought myself a new case, the Silverstone GD08 case. Im currently running an I3, with 8GB ram and the cheapest 1GB gfx card i could find. As its a multimedia based computer, i still want to dual screen, so movies on 1 TV and games/general use...

Hey guys, bought what i thought was a bargin, However, it doesnt look right. The fuel pump electrical connects or O-terminals, not a plug, theres no return line and the sender fuel gauge bit looks different. The part number on it is 92023582 but it doesnt match to anything. Also has the number...

Hey guys, has anyone used these subs? Looking at buying 2 of them to do a tidy boot install. About 200wrms they will be getting as i have a 400wrms amp. At $88 each i have to ask as they are usually are about $250 each. Here are the specs: Dual 4-Ohm Voice Coils 300W RMS Rigid...

Can someone please explain these things to me? Why do they have the merger so far back with long tip ends? Is it a different sound or better effect with different lengths of tips? Cant find much info on it except people selling them.

ITEM: TT-01D electric drift car LOCATION: Susnhine coast, Queensland CONDITION: Used PRICE: $550ono DELIVERY/PICK UP INFORMATION: Pick up only PAYMENT OPTIONS: Cash. CONTACT DETAILS: PM only OTHER INFO: I bought it late last year, starting playing with it, spent some money...

Thought you all might want to have a read. Hoons' Cars To Be Crushed Under Proposed Law Changes | Queensland

ITEM: Lock right LOKKA LOCATION: Sunshine coast, Queensland CONDITION: New PRICE: $500 firm. DELIVERY/PICK UP INFORMATION: Pick up or postage costs PAYMENT OPTIONS: Cash or bank deposit CONTACT DETAILS: PM OTHER INFO: Brand new. Harder to find. My lose your gain. PICTURES:

ITEM: 1. Lowered Monroe gt sport struts. Suit vr/vs. new in box 2. Nolathane front lower control arm bushes. Suit vb-vs. new in packet 3. Reco LSD from top cog. New bearings fitted. Suit vlt-vs live axle, some falcons and r31 skylines. LOCATION: Queensland, Caloundra. CONDITION: 1. New...

Im not sure if many of you are aware, but Grunt Files are having a massive campain regarding the "Hoon" laws. I for one am being apart of this after hearing about the new law the police are trying to obtain to police "Hoons". As i am in QLD, this is the one i can focus on. I plan on sanding this...

Iv complectly forgotten about the speed when im changing to 3.45 from 3.08s. Whats the best way to go? A jaycar kit or memcal due to them being roughly the same price. Had a search around its all related to vn/vp which alsio does nit answer my question. Cheers

Iv started replacing all the bushes in the rear end. I bought nolothane as everyone recommends it. However when i went to get the lower control arms bushes (4 of) installed, the suspension mob refused to install them. As im also getting a centre and ratio change done at a diff shop (so diff...

Hey guys i was recommend the phillips 100+ after being defected for HIDs, i finally got around to getting them priced up, when i discovered they also had a Narva 120+ Would i be better getting the Narvas? Their both $65 a set. I just have not seen anyone recomend the Narva ones before. I will...

I thought i might post this up to warn some people as i got the shock of my life. Unfortuently i cant name the person that did it. But it was bought from ebay as a reco with new bearings for $350 plus $25 postage. I went to take it to my diff guy to get it installed with a ration change. With...

Well i thought i might post it up here so see what i should expect when i take it out on the road again. Im the type of person thats about the go, not the show. So What iv done is put a hole in the bonnet above the L67 CAI. The L67 CAI has also been modified and sealed so when the bonnet...

Hey guys, i just bought myself a new amp, due to the specials that were on this was my choice. It was working fine from the 28th till today i noticed it wasnt working. Its got me stuffed, all the wiring works, took a wire off from the amp to sub to make sure the sub isnt causing it problems. The...

Im on the hunt for a reco LSD. There use to be heaps on ebay that were a full reco with new bearings for under $300. These days i can only find recos with old bearings for over $300. Diff shops want $300 to $400, closer to the $400 mark. Can you recommend a place that sells them cheap, postage...

Im trying to find suitable replacements. I was defected recently for the HIDs in my VS. Im not here to whinge about that, i knew they were illegal to have installed in this model from the get go. After this defect i went to put standard globes in, the visibility was terrible! It got to the point...

Hey guys. If the car doesnt sell next week ill just chuck the money into the drive line. The transmission is already a work of art, just have the motor, tail shaft and diff to do. First question i have is about the stage of cam. I can only find vids of the stage 2. I dont want a mega lumpy...

LOCATION: Sunshine coast, Queensland YEAR: 1997 SERIES: VS Series 2 BADGE: Equipe CONTACT DETAILS: PM Hey guys looking to sell my VS. It has been returned to stock (engine wise) apart from a L67 CAI, lukey cat back, 81deg thermostat and K&N filter. It use to have extractors and just about...

Hey guys im reverting my car to its stock form as iv had a gut full of its problems. All items came out of a VS V6 Auto. ITEM: Mace 12mm Spacer $100 Mace 12mm insulator Sold Mace 69mm TB Sold Pacemaker extractors and custom made y-piece SOLD Custom tune from The1 to suit all of the above mods...

Hey guys, i installed new injectors today, the $140 ones from feebay. Since installing them the car runs like tottal crap and it chucked up errors 31 and 35. However it has never put up those codes before the injector change. Its got me stumped. I was suppose o be meeting with family in a hour...

Iv been looking at putting 3 gauges in the car. Trans temp, volts and oil press. However im look for function rather then looks, however if i could get black face with green lights it would be good. But i also dont want a single bulb set up as they dont like all the numbers too well. What can...

Hey guys. I'm looking to replace my cat back as this 2.5" without rear muffler is too damn loud and drony. I'm been looking at cheap eBay alternatives to solve my problem. What I'm looking at are a few options. I wouldn't mind a duel outlet but what's the upside of it apart from looks? It also...

Hey guys, im looking for a graffiti artist to do some work on my trailer. Im looking to get the 2 rear doors done with our website name and some designs done. Will pay for paint and your time (free would be great). Trailer is located in caloundra and will have a base coat of black on it.

Hey guys, iv got a problem with my idle when i come to a stop whilst in gear. This happened with my previous transmission but a new AFM fixed that problem. Since i put the new transmission in that problem has returned. By erratic idle im talking about i come to a stop at say the lights and itll...

Hey guys, i just finished installing my rebuilt transmission. I did it myself. After the install added fluid and went to drive. Reverse works. However, d doesnt work, its like its in nutral, if i manually shift it works for 1st and 2nd. 3rd has a huge clunk and when i go to put it into d it just...

ITEM: 2007 Hyundai Elantra Slx Hd 5Spd PRICE: 10500ono May swap for VY/VZ sedan V6 with/without cash. LOCATION: Caloundra, Sunshine coast. YEAR: 2007 SERIES: Elantra BADGE: Example: SLX HD ENGINE: 4 banger TRANSMISSION: 5 Speed manual COLOUR: White EXTERIOR CONDITION...

Hey guys, for a year or so iv been using windows xp on my full sick computer. Its been activated and even had all the updates done. All is well untill i moved house a few days ago. I set it all up and got the message "you must activate blah blah blah". So i went to do that and it said it was...

ITEM: Ps3. 3 Games. 2 Remotes. Hdmi. Receipts. Warranty. LOCATION: Sunshine coast, Queensland. CONDITION: Used PRICE: $300 Firm DELIVERY/PICK UP INFORMATION: Pick up only PAYMENT OPTIONS: Cash CONTACT DETAILS: PM OTHER INFO: Selling my PS3 and everything that comes with it. I bought it...

So i got bored at about 2am this morning and went hunting for something to do. The things i came up with required power tools or parts i didnt have yet. So i look in the corner and find some old rocker covers. I then started to think, what could i do to these to tidy them up. As i only had some...

I started painting the rims today and discovered the passenger side tyre has been rubbing on the strut. The wheels arnt to big. Only running 235 45 17s on the front. Its not rubbing on the drivers side. The only thing i can think of is when the passenger side mounted a gutter at 40 - 50km/h. No...

Currently im rebuilding a 4L60E transmission for my car. I have never down this before and im learning on the way. The only transmission i have ever rebuilt was a 3-speed trimatic for a 202. So this thread is dedicated to the tear down of the transmission. As i havnt ordered my parts yet i can...

Just want to say thanks to Hako for the free transmission. It is greatly appreciated!

Since owning this VS i have been through 2 engines and 2 boxs now. The first enough someone didnt loctite any of the bolts ans **** started falling off and leaking. However the boxs just keep dyeing. This may well be due to the extra power+torque through a standard old box. Im not wanting to go...

Hey guys, this problem just happened over night. It worked fine before turning the car off, go in this morning and no dice. It has all the gears, in D it shifts fine and starting off in 1st working my way up works fine. But as soon as i want to drop back a gear using the shifter manually, to...