Recent content by Wheels2004

On mine there's 235/45/17s (97v- from memory, not sure how that compares

What's the diameter of the tyre supposed to be on a VY?

Looks like a good thread, but can the pics be restored in the OP?

Good stuff, i figured the plastic panel had to come off The button on mine (Vy) the rod weared itself right through the plastic button Got another seat section for free off a VY Calais, i would have just swapped it over. but the fabric has flaws, pity coz it has an inbuilt arm rest So, gonna...

Thanks Trevor Removing those 4 fasteners on the bottoms, got it off I looked at instructions online, nobody explained that, perhaps it varies from year to year

I removed the 4 screws from the wheel archers removed the two screws on top of the bumper removed the 4 nuts inside the quarter panels but, it doesn't seem to come off Is there a trick, do you need two persons? On either side of the top of the bumper, just below the inner tail lights - i pulled...

There must be a virus around. temperamental system by the sounds my boot lid doesn't swing right up, i thought that's what it was supposed to do too, but at least i can just lift it up and open it now

are they the same as ford, ford AU? thinking if so.. i could take the lock nuts off the AU and have them for the VY (before i sell the au)

I needed to lower it a bit, now she works fine!

thx for the pic, looks like there is an adjustment there

I've tested the mechanism while the boot is open using the remote, since, it actuates - clicks it open I see where you mean now, i wonder instead of bending it up a bit can it be adjusted up, loosen the screws that holds it?

yeah, the motor works everytime using the remote, but it isn't opening the boot, i was just saying the manual cord works this time because it didn't open the boot before the catch, the part where the wire rod hooks on?

How do you mean, Trevor?

Whoop, missed that.. so there's a bit of play there too, huh, ***take two

ok, i grabbed an actuator and the boot latch from a wrecker.. wire and rod points are in good nick which i thought was a bargain $30, the motor works everytime, when i pull the manual cord it works this time, but not on the actuator, i'm wondering if the wire is too long can it be adjusted...