Recent content by beardy91

Go for the Crow Cams Profile 8531563. Works a treat with all the fruit.

Go for the Crow Cams profile 8531563. Works a treat!!

Just a little tip... DO NOT USE ANY OTHER PLUG IN A HOLDEN V6 ENGINE OTHER THAN THE ORIGINAL HOLDEN PLUG PART NUMBER 92141875 OTHERWISE PROBLEMS MAY ARISE!!! We have had lots of problems with spark plugs breaking down, even brand new ones from different spark plug manufacturers eg. NGK, Bosch...

I recommend that you use Redline Light Weight Diff Oil or Redline Heavy Weight Diff Oil if you do a few skids or drive a bit harder than the average Joe. If you want something cheaper, try Castrol LSX90 as this works a treat too.

Hey VRV666, if you want a go fast memcal for Xmas PM me with your details and I will send it to you and you can tell the boys on here how it goes. It made 25 rear wheel brake horsepower more at 5000 rpm on our dyno than any other memcal we have tried and lets see if you can crack into the 8...

Have you got any 5 speed manual gearboxes or flywheels?

Another lot of Camshaft Specifications, this time from Wade Cams: Wade Cams Profile Number 1250 Smooth Idle, good torque, suit gas Advertised Valve Timing at height - 0.006 inches Inlet Opens - 23 degrees BTDC Inlet Closes - 67 degrees ABDC Exhaust Opens - 63 degrees BBDC Exhaust...

The early VS had the Series Two engine in them like the late VP's and all the VR's. Only the late VS's had the EcoTech engine in them.

Check out V6 Camshaft Specifications in V6 Development and Modification for standard camshaft specifications and some aftermarket camshaft specifications.

Check out V6 Camshaft Specifications in V6 Development and Modification for the standard camshaft specifications and some aftermarket camshaft specifications.

Check out V6 Camshaft Specifications in V6 Development and Modification for standard camshaft specifications and some aftermarket camshaft specifications.

Another lot of cam specifications. This time from Tighe Cams: Tighe Cams Profile Number 1021 Advertised Valve Timing at height - 0.006 inches Inlet Valve Duration - 252 degrees Exhaust Valve Duration - 263 degrees Inlet Valve Lift with 1.5 to 1 ratio rockers - 0.405 inches Exhaust...

If you are looking for some aftermarket camshaft specifications for the EcoTech engine then here are some that I have come across: Crow Cams Part Number 8531562RH Power Range - 1800rpm to 6000rpm Mild performance cam for standard engines. Needs exhaust system. Advertised Valve Timing at...

If you are looking for camshaft specifications for the V6 here they are: Standard Camshaft Timings for the early VN Series 1 V6 Engine: Advertised Valve Timing at height - 0.006 inches Inlet Opens - 22.4 degrees BTDC Inlet Closes - 66.9 degrees ABDC Exhaust Opens - 70.7 degrees BBDC...

If you are chasing any head flow specifications, please have a look here: Head Flow Data as supplied by greenfoam Stock VN/P Buick V6 head flow 28 inches of water Intake Lift Flow 0.100 51 cfm 0.200 109 cfm 0.300 147 cfm 0.400 156 cfm 0.500 162 cfm Exhaust...